NO 2ND gear help a newbie out please

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bob441

New Member
Joined
Oct 17, 2013
Posts
4
Reaction score
0
Location
Kentucky
Ok i have had this 2001 expy for about a month today when I started it it was running rough,and it has the code for both banks lean and misfire on #7,and then I lost 2nd gear it shifts from 1st to 3rd and then overdrive. When i manually put it in 2nd it pulls ,but does not seem right,the overdrive off light is not blinking where should I start???thanks Bob441
 
Last edited:

bcmaxx

Full Access Members
Joined
Jun 18, 2013
Posts
184
Reaction score
12
Location
trail,b.c.
Ok i have had this 2001 expy for about a month today when I started it it was running rough,and it has the code for both banks lean and misfire on #7,and then I lost 2nd gear it shifts from 1st to 3rd and then overdrive. When i manually put it in 2nd it pulls ,but does not seem right,the overdrive off light is not blinking where should I start???thanks Bob441

Sounds like a factory limp mode to me. Don't drive it with a miss. Fix your problem first. Start with plugs and coils.
 
OP
OP
B

bob441

New Member
Joined
Oct 17, 2013
Posts
4
Reaction score
0
Location
Kentucky
fiexed the COPS

Wow #7 then was a bear ,then #2 started missing but it was EZ.I never thought that a missing motor would make the tranny slip but it seems better now thanks for the response Bob441
 
OP
OP
B

bob441

New Member
Joined
Oct 17, 2013
Posts
4
Reaction score
0
Location
Kentucky
ok after all.....

I have been driving the gas hog very little but now it wants to wind up to about to 4500 rpm before it shifts out of 1st but if i wind ot up to 3000 and let off of the trottle it shifts better
 

JUST4FUN

Admin
Staff member
Moderator Administrator
Joined
Oct 25, 2005
Posts
2,104
Reaction score
150
Location
Il
Change the gas filter, its a cheap and easy. if its plugged up it will do what your saying in your post
 
Top