juan214
Full Access Members
Found the No Crank Fault!
Decided to be lazy and hit the starter from inside the fender. I had the hood open so there was plenty of light. When locating the starter I noticed a harness sitting on top of the manifold. I nudge it up, put a new fuse in for the Transmission B+ that kept blowing. It did not blow. Jumped in the truck and it started right up. Pulled around and up into the driveway to do an inspection of the harness for broken wires and make the repairs needed.
The trucks an 07 and the factory jack has never been used. LOL.
Hope this cures the feeling i get of a mis / lundge as well.
Decided to be lazy and hit the starter from inside the fender. I had the hood open so there was plenty of light. When locating the starter I noticed a harness sitting on top of the manifold. I nudge it up, put a new fuse in for the Transmission B+ that kept blowing. It did not blow. Jumped in the truck and it started right up. Pulled around and up into the driveway to do an inspection of the harness for broken wires and make the repairs needed.
The trucks an 07 and the factory jack has never been used. LOL.
Hope this cures the feeling i get of a mis / lundge as well.
Last edited: