Power loss

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Lisa Rubino

New Member
Joined
Jul 28, 2019
Posts
3
Reaction score
0
Location
Deltona FL
hello, I need help!

oil & power train light came on after a 40 minute drive. Coolant flushed, oil pressure gauge & throttle position sensor replaced. no power, what do I try next?
 

WhiteFalcon

Well-Known Member
Joined
May 13, 2016
Posts
46
Reaction score
8
Location
Charleston,SC
Do you have a code scanner? Does the throttle position warning come up when you go to start it? I just went through something similar and it turned out that the connector to my throttle position sensor was bad. Changed it and that fixed it.
 

Adieu

Full Access Members
Joined
Dec 22, 2016
Posts
3,717
Reaction score
798
Location
SoCal
Does it have anything to do with throwing truck into reverse?

Did you lose power steering as oil light came on?

If yes, don't panic it's one of a couple cheapo parts.

35 bucks and 5 minutes fixed me
 

stamp11127

Full Access Members
Joined
Mar 10, 2012
Posts
6,207
Reaction score
1,246
Location
Temple, Georgia
Oil pressure and engines 101...

Anytime you have an oil indicator light come on while the engine is running, you should immediately shut down and check oil pressure with a mechanical oil pressure gauge.

One of two possibilities can exist:
1) the idiot light/warning indicator is false and the oil pressure is fine

2) the idiot light/warning indicator is accurate and you don't have oil pressure.

You have to ask yourself "do you feel lucky today?"

Number 1 is a cheap fix, number 2 will be expensive as in engine replacement or rebuild.

If we make a bad call on a semi engine and it seizes, we are looking at about $25,000 - $35,000 repair. So we don't guess, we check. It hasn't cost us money turning it off!

Once you establish that you do in fact have the correct oil pressure you can properly diagnose the issue. One thing that may be happening is the pcm thinks the engine doesn't have oil pressure and will cut back all performance to try and by some time before it seizes.
 
Last edited:
Top