Rear bushings

[gajim01]

Hi all, still very much a newbie here but have a question.

I bought a kit to replace all the bushings on the rear. Sway bar/stabilizer/end links, not sure of the exact terms. Is there anything tricky here that I should know about or pretty easy? I couldn't find any videos on it.

Thanks!

 

[grantpa]

If you aren't doing the trailing arm bushings, you're good. Just soak them bolts/nuts with Synthetic ATF mixed with acetone 50/50 as a penetrant and get 'er done. Works better than PB or WD40.