Replacing COP's

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Butch Smith

Full Access Members
Joined
Mar 8, 2008
Posts
117
Reaction score
5
Location
Atlanta,Georgia
03 5.4L Started skipping today when under load. How hard is it to replace coil over units?? Is there a DIY anywhere with pictures? Thanks for the help
 

hellrazer

Active Member
Joined
Sep 13, 2010
Posts
30
Reaction score
0
Location
Reading, PA
depending on which ones you are replacing they are not very hard to do just kinda space limited i just did plugs and one cop on mine. the cop is held on with one 7mm bolt and then the eletrical connection.
 

firefighter407

Well-Known Member
Joined
Oct 26, 2008
Posts
58
Reaction score
0
Just did plugs and cops on mine today took me about 3 hrs. but if your only doing the COPS should bee easier you'll just need a 7mm socket and a couple differnt length extensions and a swivel helps too. I had a couple of the boots stick on the plug all i did was use a pair of long needle nose pliers and they came off.

Not too bad of a job though hardest one was the back passenger side
 

Stoned06

Full Access Members
Joined
Apr 2, 2008
Posts
995
Reaction score
34
Location
Milwaukee
Not too bad, just need some patience to get to the 7 mm coil pack screws out of the rear plugs on each bank.
 
Top