Roll pan

[JTKustoms]

so i'm looking to do a roll pan on my truck and i wanted to see if anybody on here has one or has any experience with installing them on these trucks. any help is appreciated

 

[panda24619]

yeah. walnuts. he has one, but his was hard to put on with his body lift, but you shouldnt have that much trouble.

 

[JTKustoms]

i thought i read somewhere that the one walnuts has was for a f150 so he had to modify it to work? maybe im wrong

 

[panda24619]

you could be right. i dont remember exactly. but since your stock you shouldnt have too many troubles getting it installed.

 

[walnuts4x4]

yes mine was for a F150.... but biggest problem was fitting it around the frame horns due to body lift... but a little cutting and trimming DGray69 got it too fit perfectly for my

 

[JTKustoms]

walnuts, i ended up finding one for a f150 on craigslist for 20$ so i had to buy it, ill let you guys know how it goes once i get around to fitting it

 

[walnuts4x4]

shouldn't be too bad especially since you dont have a body lift... mine had to be trimmed on the bottom to clear the frame horns

 

[2000UN93]

those are pretty sharp. What do you do about license plate lights? are they set up for them?

 

[SOLISIMO]

Cant beat 20$

 

[walnuts4x4]

mine i went to autozone and found a LED light that used the license plate bolts to attach it... but I also painted the side facing traffic black so the only light would shine straight down to the plate

 

[JTKustoms]

yeah i have the led plate light that attaches to the top two bolts of the plate too

 

[walnuts4x4]

if its similar to mine just a little trick is tape off the lens along the bottom just above the plate and paint the side facing traffic.... makes a cleaner look and lights up just the plate.. a friend did it for me when we were painting the roll pan and I love the look, have seen others that have not painted the side facing traffic and its way too bright.. just my .02 can post some pics if you want me too

 

[JTKustoms]

i'll have to take a look at mine next time i'm home to see if it shines the way yours used to, i never really paid attention to it until now that you brought it up

 

[dgray69]

yes mine was for a F150.... but biggest problem was fitting it around the frame horns due to body lift... but a little cutting and trimming DGray69 got it too fit perfectly for my

I remember that day, uggg I recall a lot of cursing, or was that only when my beer got to low, great day,

 

[walnuts4x4]

that was our wives....lol.... or maybe it was the beer.... hmmmm

 

[ydopen]

Any pics of the roll pan yet Jt? So one for a f150 will work on the Expy? are yall running steel or fiberglass?