Running Board Lights

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bjp22383

New Member
Joined
Oct 17, 2015
Posts
3
Reaction score
0
Location
CT
Hey guys, new member here....just bought a 2000 Eddie Bauer last weekend. Ran into a problem today (just noticed it today), my passenger side running board lights aren't working anymore. Anybody know what I should check? Fuses are good
 

Bedrck47

Full Access Members
Joined
Jul 4, 2014
Posts
5,639
Reaction score
659
Location
Elizebethtown, PA
What fuse/s did you check and how did you check them??

Can you read and understand wiring diagrams?
 
Last edited:
OP
OP
B

bjp22383

New Member
Joined
Oct 17, 2015
Posts
3
Reaction score
0
Location
CT
bulbs are good..fuses I pulled out and checked..I think it was number 15 and 16 interior fuse box...they were working just a couple days ago..maybe ill check to see if they are getting power, im not sure. Wiring looked intact
 

Bedrck47

Full Access Members
Joined
Jul 4, 2014
Posts
5,639
Reaction score
659
Location
Elizebethtown, PA
There is a fuse in the Battery Junction Box under hood #15 it is for the running boards but you say the passenger side isn't working so the fuse may be good. When checking fuses always use a meter or test light.

There are 3 connectors on the passenger side one at each lamp and the one for the harness check the one at the harness to see if you have power there. Clean the connectors and use dielectric grease when reconnecting them
 
Last edited:
OP
OP
B

bjp22383

New Member
Joined
Oct 17, 2015
Posts
3
Reaction score
0
Location
CT
Ok..thanks! Ill check it out and see what happens..thanks again
 
Top