Squeaking noise help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

tepponogu

Active Member
Joined
Oct 8, 2011
Posts
35
Reaction score
0
Location
colorado
Hi guys, new here. I'm about to buy a 97 tomorrow, there is only one thing that I have a concern about with it. When the truck is sitting still or rolling slowly, there is a squeak when the wheel is turned. I'm guessing its the grease points running dry and making noise, but this is the first ford I've ever owned so I'm not sure. Any help is appreciated.
 

rburch

Full Access Members
Joined
Jun 10, 2010
Posts
1,432
Reaction score
10
Location
Independence, Mo
Its probably the control arm bushings. Take a look at them and see if they are all cracked.
 

KWT2000

Full Access Members
Joined
Feb 4, 2010
Posts
2,378
Reaction score
43
Location
NINE MILE FALLS
most likly it is the non greasable ball joints and steering linkage...

you can grease them with a grease needle, but do a good suspension check first and see if they need replaced
 

outkast

Full Access Members
Joined
Dec 9, 2009
Posts
171
Reaction score
1
Location
Caseyville, Il (near STL)
yup, if you havent picked it up yet, just know one ball joint (lower I think) is replaceable, the upper, you have to buy an entire a arm....unless im wrong and sombody figured out how to get it out.
 
Top