Started on the stereo system

[MPTonyT]

Heres whats going into (or already in) the vehicle

Pioneer AVIC-D3 w/ custom dash kit (due to factory navigation)
Pioneer CD-BTB200 Bluetooth unit.
CD-I200 iPod Cable
PAC SWI-RC steering wheel control module
BOYO VTL300C Reverse Camera plate frame
2 x Phoenix Gold Ti 5x7
1 x Phoenix Gold SD800.5 Amplifier
1 x Phoenix Gold R1.10D
1 x Custom fiberglass enclosure in factory sub location
100 ft^2 Expert Roadkill Sound Deadener

So far I have installed the head unit, door speakers and sound deadened the doors. I will be amping the entire system with a 800.5 5 channel amp as soon as i get my hands back on the prototype.

Here are a few pics.

Ill take more as i do more.





Got the back stripped down and ready to tape off and glass it up..

 

[Chrismdean09]

could you make me a dash kit like that will pay if not un reasonable

 

[jjbusa]

im interested in the sub box.. LMK. i have 2 tens in a box already but i dont mind loosing one 10 to gain the space back.and ill be in orland the first week of march so no shipping needed.. lol

 

[MPTonyT]

could you make me a dash kit like that will pay if not un reasonable

All i did was use the factory bracket to mount the radio and then i made a trim panel with a handheld router with a jig.

im interested in the sub box.. LMK. i have 2 tens in a box already but i dont mind loosing one 10 to gain the space back.and ill be in orland the first week of march so no shipping needed.. lol

Let me get this one made see how i like it and how much its going to be to make and so on. Ill let you know if I'm interested in building another one and if its beneficial for the both of us.

 

[GAINMOB]

how big of a box do you think can fit behind the 3rd row with it up?

 

[jjbusa]

sweet keep me updated!

 

[MPTonyT]

how big of a box do you think can fit behind the 3rd row with it up?

I have no idea. Haven't measured. My goal with this project is to look inside and not be able to tell anything was done....

I'm stripping everything out tonight to deaden the interior. I have 100 ft^2 in my F250... lets see what i can get in this pig.

 

[ghost0217]

On my way buddeh!

 

[MPTonyT]

Well Ghost and I got a lot accomplished last night with completely stripping the interior out and laying approximately 40 ft^2 of Stinger Expert Roadkill. We also installed approx. 12 ft^2 of Stinger Foam Damping Mat The only pics i have didn't come out real well due to it being a camera phone and the aluminum backing created a ton of reflection. Got the wires ran and figured out the amp mounting location. It is going to go under the center of the second row of seats. The one that slides forward and back.



The 5 Channel amp i will be using....



The RCA's I'm using.... (ssshhhh... Don't tell anyone, these don't get released till next quarter)



And the Wiring...

 

[jjbusa]

Wish I was around to give a hand looks like fun.

 

[panda24619]

ONE DAY!!! that will be me! haha but sound damping mats costs so much. but you must have got a killer deal since you have all stinger and prerealised stinker rcas! thats kool. my cable is going to be kicker cable only cause i found a killer deal on a web site and they said if the sale ends they will still sell it to my for dirt cheap. i was like SCORE! haha

 

[MPTonyT]

Let's just say I'm in good with Stinger... I may possibly be able to spread the wealth if interested.

 

[panda24619]

hells yeah! but not right now. im more interested in getting my kicker up and pounding again. then ill upgrade everything as it comes. but if you want how much for the rcas? haha

 

[Chrismdean09]

Spreading the Wealth with DEADNER haha that sounds amzing to compliment my 2 15s in a ported box peaking at 32hrz runing on a sundown amp for the subs and another one for the speakers. sitting on a false floor where the third seat was once at.

 

[LameSuburbanDad]

I would like to do some business, I sent you a message. thank you.

 

[MPTonyT]

I would like to do some business, I sent you a message. thank you.

I replied to your message.

The enclosure is being built today. Me and a buddy that I work with are knocking it out. Should be done this afternoon. I got a better camera (not my camera phone) and figured ya'll would like to see some better pics.... Here they are.

The Deadener



The Amp install.



My buddy getting started on the enclosure by taping off for easy removal.



It all taped off

 

[Chrismdean09]

its always a slow but steady thing car audio.. It looks like its going great soo far..keep up the good work

 

[MPTonyT]

Few More pics.

 

[phocker]

I was what size and brand sub you are putting in there because this is exactly what I want to do to my 05 and I am using a 12dcv mb quart do you think I can make it fit plus my amp crossovers and cap and still look stock back there?

 

[jjbusa]

Looking good hope it sounds good