creddy
New Member
2014 EL XL
Digging into my front suspension tomorrow. The upper control arm on the passenger side is completely missing one of the bushings and the shock on the driverside is blown. I'm replacing with KYB SR4456ks, Mevotech control arms, and doing the brakes as long as I've got everything off.
I know I need to take a premeasurement at the center hub to get the ride height so the upper control arm is at the correct angle, but the KYB's claim they'll lift by 2 inches. Do I need to accommodate for that when tightening the control arm?
Digging into my front suspension tomorrow. The upper control arm on the passenger side is completely missing one of the bushings and the shock on the driverside is blown. I'm replacing with KYB SR4456ks, Mevotech control arms, and doing the brakes as long as I've got everything off.
I know I need to take a premeasurement at the center hub to get the ride height so the upper control arm is at the correct angle, but the KYB's claim they'll lift by 2 inches. Do I need to accommodate for that when tightening the control arm?