Wire my fog lights to stay on when the engine is running, 2017 Expedition

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

rob4092xx

Full Access Members
Joined
Aug 1, 2005
Posts
356
Reaction score
94
Location
Phoenix, AZ
I would like to wire in my LED fog lights so they act as DRL lights when I am driving. Any tips from anyone? Is there a switched on wire anywhere under the hood that I can use? A wire that is hot when the engine is on and is dead when the engine is turned off?

Thanks!
 

RedExpy

Full Access Members
Joined
Oct 13, 2011
Posts
102
Reaction score
7
Location
Kansas
i would think that you could use a hot side from the fuse box located on the front top of the engine bay... i would think. There should be some accessory, or even unused fuse location, that could be tapped into. You may need to increase the fuse due to the load, but someone might be able to chime in. I like this idea and had thought about doing it.. .just haven't done it yet.
 
Top