Power loss/poor throttle res. in 2006 5.4L
- Thread starter Gruz7
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
Gruz7
Full Access Members
So I have no codes on the entire truck with multiple scan tools... He PCM read would tell me otherwise ?
Sent from my iPhone using Tapatalk
I do this once a year with all my cars and my wife's car just before the winter hits, it'll give a report of what's happening and what to look out for in the upcoming months that way I usually take care of everything before winter hits so I don't have to freeze to death fixing something that I could've fixed months prior.
OP
OP
Gruz7
Full Access Members
Sounds promising... I guess I'll try to get that done after the brakes are fixed and also see if they wanna reflash it for me while I'm at dealer
Sent from my iPhone using Tapatalk
OP
OP
Gruz7
Full Access Members
My name is Jared and last name is Gruslin (hence the Gruz part) lol
Sent from my iPhone using Tapatalk
OP
OP
Gruz7
Full Access Members
Master cylinder is installed and I still have the tranny issues and no engine codes AT ALL. I am just going to take the truck right to a tranny shop as my mechanic said it reading so kind of odd pressures and he suggested a good tranny place I'm going to try out
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Maloburro
Active Member
Hope it's something simple. Keep me posted.
OP
OP
Gruz7
Full Access Members
Well figured I'd update this thread too for anyone following along... The truck was dropped off at the transmission shop I picked today.
It has a few new parts you can see earlier in the thread and nothing has fixed the issue and the still have yet to get any codes.
The tranny pressure is reading somewhat low in reverse and I am still on and off losing reverse and the truck is shifting hard and way too early still.
Guess I'll wait and see what they say but I hear the Jasper 4r75 isn't a bad tranny at all and I might look further into them
Sent from my iPhone using Tapatalk
It has a few new parts you can see earlier in the thread and nothing has fixed the issue and the still have yet to get any codes.
The tranny pressure is reading somewhat low in reverse and I am still on and off losing reverse and the truck is shifting hard and way too early still.
Guess I'll wait and see what they say but I hear the Jasper 4r75 isn't a bad tranny at all and I might look further into them
Sent from my iPhone using Tapatalk
OP
OP
Gruz7
Full Access Members
Tranny is blown... Needs to be rebuilt or replaced... Have a $3600 complete exact quote to replace it with a new one and another quote for around $2200 to rebuild it somewhere else... Now I just gotta find the money
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
OP
OP
Gruz7
Full Access Members
Yeah you said it... Currently, my uncle and I are looking for a used one at a few junkyards up here but the trouble is that I'm in Rhode Island and there isn't much of anything... We can do the granny swap I just need to find a solid one and also I need tranny lines mine are rotted as all heck
Sent from my iPhone using Tapatalk
OP
OP
Gruz7
Full Access Members
This is what a local search in your area turned out
http://worcester.craigslist.org/ptd/5707607822.html
http://hartford.craigslist.org/ptd/5679300390.html
http://providence.craigslist.org/ptd/5712649944.html
http://worcester.craigslist.org/ptd/5707607822.html
http://hartford.craigslist.org/ptd/5679300390.html
http://providence.craigslist.org/ptd/5712649944.html
OP
OP
Gruz7
Full Access Members
Saw the f150 on the providence link... Thanks for the help!
I'm going to have to just figure it out
Sent from my iPhone using Tapatalk
Maloburro
Active Member
Wow that's awful. Mine has many of the same symptoms but I'll probably drive it until it stops moving.
Similar threads
