Dice Roll
Full Access Members
Did the interior come out easy? I need to do my pass side, I found a local dealer that will take just under a grand for a new one. Have wondered if it will come apart and then go back in place without being distorted.
new tail light
- Thread starter Left Coast Geek
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Did the interior come out easy? I need to do my pass side, I found a local dealer that will take just under a grand for a new one. Have wondered if it will come apart and then go back in place without being distorted.
OP
OP
Left Coast Geek
Full Access Members
no interior stuff at all. I removed the rear hatch 'door jamb' while I was exploring, but I don't think I even needed to do that. What I *did* need to remove was the plastic/rubber strip between the tail light and the rear hatch seal, gently pry it off from either end, its held in place with two press-fit pin things... under it there's 2 or 3 bolts, remove those, and pull the tail light straight backwards and boom, it comes off. I had to unplug the cable, and release a cable tiedown that was pressed into a tab on the back of the light, reassembly is the reverse.
Similar threads
