Need a little help 06 eddie bauer 5.4 approx.116000 miles got a p0305 error code with a pending p0355 code idles rough no power. Swapped #5 coil with #6 coil to see if the code changes. Now I have a p0022 error any help
0305 code
- Thread starter bam196510
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Yudaman
Full Access Members
When is the last time it had the plugs changed?
I went through that with my '99. Plugs wore and got all kinds of awesome misfire codes.
But, if the cams are out of time, that could cause all kinds of gremlins to show up.
I went through that with my '99. Plugs wore and got all kinds of awesome misfire codes.
But, if the cams are out of time, that could cause all kinds of gremlins to show up.
ExpeditionAndy
Full Access Members
There is a procedure to get them out without breaking them. You spray them down with PB Blaster when the engine is cold, let them sit for 1/2 hour, then start the engine and run it for 5 minutes and then spray them again. Wait an hour then try to give them an 1/8 turn, respray with PB Blaster, and wait another hour, then try to give them another 1/8 turn and spray again, wait another hour give them another 1/8 turn and spray again. etc until they loosen and begin to turn.
ExpeditionAndy
Full Access Members
That doesn't make a lot of sense. It seems like it should be something they could fix.
Yudaman
Full Access Members
Sounds retarded to me... (da dum ching!)
How could a cam phasing issue mean you need a new motor!?!? I would get a second opinion...
ExpeditionAndy
Full Access Members
I think they are messing with you with the "retard" code. It's time for a new shop, or at least a hellava lot better description.
Similar threads
