Will these fit fine? I may have to replace tires sooner than I wanted. I’m looking at the Cooper ATP. I’m a fan of Cooper and have used these before. Not the best grip, but good life, reasonable price, and not bad looking on a 2WD.
275/60/20 on stock 2WD
- Thread starter O5111
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
1955moose
Full Access Members
- Joined
- Nov 23, 2014
- Posts
- 6,004
- Reaction score
- 1,351
I think they'll rub. I'm running 285/50r20 street Kumhos, on a 4 wheel drive 2000, and mine has a small lift installed by previous owner. Yours is slightly thinner, but not by much. As always mount one front, turn lock to lock, check for any interference, also be sure they won't hit the fender. do the rear making sure their not wider than outside quarter panel. You don't want tires rubbing and get chewed up, no matter how good a price.
Sent from my N9131 using Tapatalk
Sent from my N9131 using Tapatalk
Travis Crews
Member
Tom t you have any pics with the 275/60/20
not the best pics...but I really like the combo, drives smooth and looks imho very nice. AT tires would look cooler, but I do to many highway miles that this makes sense ;-) form follows function. Always....;-)
these are the BR Mozambique. The flow form production should make the light...I think around 28lbs
these are the BR Mozambique. The flow form production should make the light...I think around 28lbs
Travis Crews
Member
Thank you.
Any warning lights or anything like that After the little bigger tires Or just speedo off a little
Any warning lights or anything like that After the little bigger tires Or just speedo off a little
Last edited:
Stock height?
Cassie Mendes
New Member
I just got the Falken Rubitrek AT 275/60R20 tires put on my 18 Expedition and they look amazing! I haven’t drove it yet, hopefully no rubbing will occur on any bumpy roads. It’s all stock
Any pics? I wanna judge for myself.
sjwhiteley
Full Access Members
I have a hard time seeing where 275/60R20 could rub. It's probably 1/2" greater radius, and there seems like plenty of room, still - maybe for another 1"? The width is the same, so not likely to hit the upper control arm. If they don't rub on a +30 offset, they aren't likely to rub on a +44 offset (stock) wheel.
Pictures of the Falken's would be nice, tho.
Pictures of the Falken's would be nice, tho.
Cassie Mendes
New Member
They scratched my rims on the machine and are fixing the issue this week, so sorry for the dirtiness on them. I'm upset I haven't been able to make them clean looking yet. They ride beautifuly. I rubbed once making a complete turn in my driveway though.
Looks great!
sjwhiteley
Full Access Members
Fantastic. They look a lot more substantial than the size would indicate. I would not have thought they would rub: do you have an idea where it was? in the turn was it on the inside or outside wheel?
expeditiondriver
Full Access Members
How are those Rubitreks on the highway? Smoothness? Noise? How are you liking them?
expeditiondriver
Full Access Members
Why are you guys going with the larger tires? Any issues with the speedo or performance?
Similar threads
