Ac controls lights not lighting up?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jacks3am

Full Access Members
Joined
Jul 28, 2010
Posts
1,192
Reaction score
10
Location
michigan
Do the lights really burn out? I didnt expect them to but I guess they did, anyone who did the led conversion on the 1st gens or anyone who replaced them, can you steer me into which ones to get? and where to get them like are they at o'rilleys?
 

BakerEdition

EF Chaplain
Joined
Aug 6, 2011
Posts
2,095
Reaction score
61
Location
Michigan
yes they do...you can pick up a 194 miniture bulb at any auto parts....the front trim is just snapped in and 4- 9/32 screws hold the control in...it has vacuum lines behind it so pull forward slowly...you will see two wire...that go into a small housing...should be a black wire and a blue wire....black for sure....Ford never does the same thing twice...twist and pull out...its not rocket science..hope this helps...
 

rewarder

Full Access Members
Joined
Aug 17, 2011
Posts
93
Reaction score
10
Location
Phoenix
Same this is happened to mine. This site is helping me profoundly! I bought a Haynes manual and they have a pic of the Fuse box but no chart as to which fuse goes to where! So I pulled every fuse and they are all good. This is good info. Now I need my dome light to come on and I'll be all good. Thanks for the help fellas - Hunter
 

rewarder

Full Access Members
Joined
Aug 17, 2011
Posts
93
Reaction score
10
Location
Phoenix
Thanks for the help. Just replaced my bulbs. Pulled out radio / AC bezel then unplugged my AWD/4WD connector wire so the Bezel can be put to the side. Then you unscrew the four bolts and right behind the A/C control panel there were two black knob type bulb holders. You just do a 1/4 turn and out comes the bulbs. 194 bulbs were the perfect fit. BAM! I now have A/C lights! Easy Fix.
 
Top