Anyone install a Readylift leveling kit?

[sanman28]

That's a 35", I was just wondering if anyone thought that would be a little too tight if you were doing some actual offroading that's all.

Its a good question. Im willing to bet it does rub. I was going to do a 285/65/18...stock wheels. Also remove the front plastic air damn.

 

[Fozzy]

That's a 35", I was just wondering if anyone thought that would be a little too tight if you were doing some actual offroading that's all.

I have 35’s and I trimmed the front and rear of the front fenders. Trimmed the power step at the front. Removed the front air damn and trimmed the carpet lining by the air damn. I have taken it off road to the point you where dragging the bottom of the car and fully shoving the wheels into the fender wells. It still rubs pretty bad. It did not tear anything off. Rear rubbed the carpet liner on the inside behind the wheel. Daily driving at full lock backing up it will rub a little.



Sent from my iPhone using Tapatalk

 

[Shaffer9]

@Fozzy Thanks for the detailed response. I suspected some of the things you confirmed, so I'm planning to run 285/70r18s on the stock FX4 wheels to have a touch more room.

 

[stefan gimenez]

Yep. Worked great.




Sent from my iPhone using Tapatalk

Where did you get those fender flares?

 

[AKentPhoto]

@Fozzy Thanks for the detailed response. I suspected some of the things you confirmed, so I'm planning to run 285/70r18s on the stock FX4 wheels to have a touch more room.

I'd throw some spacers on for good measure... It will help the stance a bit and give you some extra clearance.

 

[JCL23]

2019 Max Limited with the ReadyLift 3/2. Turned out great and drives the same as before.

 

[DWs-TTEB]

View attachment 38075 2019 Max Limited with the ReadyLift 3/2. Turned out great and drives the same as before.

View attachment 38075

Pics are so tiny man... where is my screen magnifier

 

[Sunflowergirl]

View attachment 38075 2019 Max Limited with the ReadyLift 3/2. Turned out great and drives the same as before.

View attachment 38075

Looks like the guy who guys to the gym and never does leg day with those baby tires you got there

 

[WVgirl]

Just finished . Came out very nice to me no issues. 3/2 lift 18x9 fuel rims 285/65r18 Nitto grappler G2’s. No rubbing . 2019 limited no air suspension.

View attachment 33388

View attachment 33389

View attachment 33390

 

[WVgirl]

View attachment 33392
Just finished mine a couple weeks ago. 33x12.50R22 Ridge Grapplers

What offset are your wheels?

 

[WVgirl]

Yes I am. I have 1.5" spacers. They are not needed I just wanted the look. I do have very slight rubbing on the front but nothing bad at all.
View attachment 33745
View attachment 33746

Sorry. I didn’t see those were factory wheels. So you just used spacers to bring them out some. I love the look it gave yours.

 

[757expedition]

Very light trimming of the inner fender liner. I have the retractable running boards. I did shorten them about 3 inches. Simple to do.


Sent from my iPhone using Tapatalk

Can you share some pictures of the trimmed auto running boards as well as the process?

 

[fordguyca]

Hello All,

I have a 2020 Expedition Max and am currently having the 3/2 kit installed on it. My question is, does anyone think I’d have any issues with rubbing or having to trim with BFG ko2 285/65/20? Rims are stock from the factory, so I’m assuming they’re a pretty positive offset.

 

[sanman28]

Hello All,

I have a 2020 Expedition Max and am currently having the 3/2 kit installed on it. My question is, does anyone think I’d have any issues with rubbing or having to trim with BFG ko2 285/65/20? Rims are stock from the factory, so I’m assuming they’re a pretty positive offset.

You will be fine.

 

[Zero Offset]

I cut 2” off and trimmed a little of the fender. The end cap is held on by two small screws. Once you cut the step you will have to drill new holes or use self tappers.
View attachment 65585


Sent from my iPhone using Tapatalk

Is this a job for an angle grinder or reciprocating saw?

 

[Hokieskins]

Enjoying the thread

 

[Wes1]

ReadyLift on my 2022 XLT with factory wheels and 295's. Small trim to rear liners and rub a little on front. However I have only had it 2 days so need to check it out a little closer.