Richard Mickelson
Active Member
Re-posting
(Check Brake System) This message is on my 2011 expedition. I changed out the parking brake switch thinking this possibly could be the problem, it was not.... Everything else is just fine, brake fluid level remains the same, no fluid leaks anywhere, braking has never change still stops on a dime. I did a temporary fix about 6 months ago with a piece of tape over the light, that was over 15,000 miles ago. I'm not about to take this to my local dealer so he can rip my head off. Now the real question is, has anyone else had the same issue? I don't need people to just keep guessing. I already read most of the guesses. Their has to be others out here that have had the same problem.
Update today: I run another scan, still no codes show up! Also did another computer reset, That did not help either - Message is still there.
It is my understanding that the Brake Fluid Level Sensor is also on the same circuit. Under the brake fluid reservoir is where the Sensor is located. That being said If it is bad, Ford does not offer this part with out buying the whole master cylinder assembly. Yet this simply plugs in place and is removed by just pulling on it..... Does anyone know if there might be a aftermarket available? There has to be some here that has had the same problem and can chime in?
(Check Brake System) This message is on my 2011 expedition. I changed out the parking brake switch thinking this possibly could be the problem, it was not.... Everything else is just fine, brake fluid level remains the same, no fluid leaks anywhere, braking has never change still stops on a dime. I did a temporary fix about 6 months ago with a piece of tape over the light, that was over 15,000 miles ago. I'm not about to take this to my local dealer so he can rip my head off. Now the real question is, has anyone else had the same issue? I don't need people to just keep guessing. I already read most of the guesses. Their has to be others out here that have had the same problem.
Update today: I run another scan, still no codes show up! Also did another computer reset, That did not help either - Message is still there.
It is my understanding that the Brake Fluid Level Sensor is also on the same circuit. Under the brake fluid reservoir is where the Sensor is located. That being said If it is bad, Ford does not offer this part with out buying the whole master cylinder assembly. Yet this simply plugs in place and is removed by just pulling on it..... Does anyone know if there might be a aftermarket available? There has to be some here that has had the same problem and can chime in?