Dash Information Tabs setup

[Regan DeMello]

Does anyone know how to keep the dash info tabs on My View when starting vehicle? Mine always defaults to the Towing Status tab even tho I’m not towing. I’ve tried setting it to My View and then saving a memory position, but no luck.


2018 Expedition Limited
Special Edition Package
301A
Heavy tow
Cargo package

 

[aggiegrad05]

Center display always on Tow menu
https://r.tapatalk.com/shareLink?sh...isplay-always-on-Tow-menu.35710/&share_type=t

Post 6

 

[shane_th_ee]

You need to set the active trailer to “No Active Trailer”. The Expy only does this automatically if you disconnect the trailer’s wiring harness with the Expy running...

 

[Regan DeMello]

Awesome thanks guys


2018 Expedition Limited
Special Edition Package
301A
Heavy tow
Cargo package

 

[Meeker]

You need to set the active trailer to “No Active Trailer”. The Expy only does this automatically if you disconnect the trailer’s wiring harness with the Expy running...

... and this is my "aha" takeaway today - thanks shane_th_ee!!! From now on I will be leaving the truck running until the connection/disconnection is done. Now to figure out how to disable the double-beep horn when closing the door with the truck on...

 

[shane_th_ee]

Now to figure out how to disable the double-beep horn when closing the door with the truck on...

Leave the key inside.

 

[scottdm]

The double horn beep can be disabled by using ForScan. Check out the 4th Gen Expedition section of the ForScan portion of this forum.

https://www.expeditionforum.com/threads/4th-gen-expy-forscan-modifications.34227/