driver window and conrol panel

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

kjohn241

New Member
Joined
Apr 22, 2013
Posts
2
Reaction score
0
Location
Southgate, Mich
Lowered my window to get into employee lot and window refuse to go back up. I can hear the one touch relay clicking but nothing else is happening. Also, all other windows do not operate either from driver door or at individual doors. Disconnected connetor to driver window motor and applied direct twelve votes, Nothing! Also the control panel on drivers door, button for drivers window will stick in up position. It appears I may have mutiple problems going on here. Any suggestions would greatly be appreciated..:uhoh2:
 

stamp11127

Full Access Members
Joined
Mar 10, 2012
Posts
6,207
Reaction score
1,246
Location
Temple, Georgia
You probably have multiple issues. I'd get a wiring diagram for your year then check the voltage out of the gem, or voltage at the driver door for each switch as you operate them.
Secondly depending on age/year, I'd remove each motor, disassemble, clean and lube it. Did that on my Sable a while back and it is still going strong.
 
Top