Error codes suspension?

[omegalita]

Hi

Can somebody say me, what these codes mean? (I have the "check suspension light coming on after 10 Minutes)

C08<D
B2TAE
ROR
P092B
DAT
B2ERR
C03<D
B04<D

Thank you!

 

[omegalita]

The codes are comming from an Android-Tool... i know, i have to check with another OBD software...
The suspension seems to work well, only the dash-light will come on after about 10-15 minutes driving...

i found that error P092B: "Gear shift lock selenoid/Actuator control circuit "B" range"

We want to go on holiday at the weekend ... Does it have an impact on the air suspension?

 

[omegalita]

Resolved the problem!

The problem were that the torsion bars were to high, so the rear end was too high..
Screwed the torsion bars "lower" and the suspension light stays of...

Thank you!

 

[fbcregan]

I'm having the "check susp" light coming on after the car has been on for awhile too. But the compressor still kicks on and seems to be working. How did your torsion bars get raised too high? Wondering if mine could be the same.

 

[GAINMOB]

careful with the check susp light...there are a few things that could be wrong..sensors...o-rings...mine came on and would keep air...do the conversion and never have to worry about it again

 

[CertusExpo]

I have a 2WD 5.4 EB 2nd gen Expo that is throwing three strange codes.

B1B<D - Body
B2TAE - Body
ROR -

I do NOT have air suspension nor did the truck ever have it and was converted.

SO..... What the hey?! Any ideas?

 

[R4mbo]

careful with the check susp light...there are a few things that could be wrong..sensors...o-rings...mine came on and would keep air...do the conversion and never have to worry about it again

I see you really liked the conversion from air to coil springs, but it's not that easy here.
In switzerland, we cannot get parts easy for our trucks. And personnally, i think the air ride is a great feature, it keeps the ride height still no matter how much weight you have in the trunk and it is very confortable to ride