Fog light wiring

[BlackBeauty]

Hey my expy dont got fog lights but the switch pulls out like it should. Its also in the fuse panel so im wondering if anyone has a diagram so i can try to figure out if there is any wiring for them in my truck. I got fog lights onto my push bar and dont want to put any switches into my dash.

Sent from my SAMSUNG-SGH-I997R using Tapatalk 2

 

[stamp11127]

Need your email address.

 

[sgtowing]

Look for the wires behind the front bumper cover. also, if you pull the switch, does the light on the swith for them come on?

 

[BlackBeauty]

Im lookingat the switch how many wires are there supposed to b for fog lights?

Sent from my SAMSUNG-SGH-I997R using Tapatalk 2

 

[BlackBeauty]

I figured it out. But got to tear it apart again. I must have wires backwards.

Sent from my SAMSUNG-SGH-I997R using Tapatalk 2

 

[BlackBeauty]

Ok switched wires still nothing. All fuses in truck and under hood, including relay are in position. Still no lights.

Sent from my SAMSUNG-SGH-I997R using Tapatalk 2

 

[stamp11127]

Does the fog lamp indicator come on when the lamps are turned on?

Do you have a test light or dvm?

 

[BlackBeauty]

From my research i need a diff switch mine does not have "pull for fog lights". Even though mine pulls out. Brand new fog lights. No extra lights come on when i pull switch.

Sent from my SAMSUNG-SGH-I997R using Tapatalk 2

 

[GAINMOB]

It won't say pull for fog light...once u pull the indicator should light up

Holy Rollerz Christian Car Club (HRC3)

 

[BlackBeauty]

Ok. So considering fuse is part of D.R.L. in truck. Under hood is relay 206 and fuse 9. Indicator light is located in the switch itself? Theres no bulb for it. It looks like its painted to me. Any idea wat wire at the switch is for fog lights? So i have multiple spots to check for power?

Sent from my SAMSUNG-SGH-I997R using Tapatalk 2

 

[stamp11127]

Indicator LED is in the main light switch.

Fuse 9 should be hot at all times. Check for power on both sides of the fuse with the fuse in place.

At the fog lamp relay, good fuse in #9, check for power at pin #3 on the relay - (may also be #30).

Are you familiar with a relay pin out? For example what #85, #86 is?

 

[BlackBeauty]

Ok i have to do frame work and rockers on my 97 tomorrow along with front wheel bearings as well. So give me a couple nights to get back to you.

Sent from my SAMSUNG-SGH-I997R using Tapatalk 2

 

[Hit By Thunder]

On my 99 f150 mine did the exact thing as yours and after researching and coming up with dead ends, I looked very close and found the wires from the switch to the power distribution box where the relay is were not there. Pull the relay out and look in the power distribution box. Where the terminals go into the box, they are missing the wires and terminals. ARGH!!!!!!

I wired the fogs with a relay and tapped into the park light circuit for a trigger for the relay. This way there was no extra amperage on the park light circuit.

Rob/HBT