Info center diplay trouble

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

fabioav

New Member
Joined
Apr 14, 2015
Posts
4
Reaction score
0
Location
ECUADOR
Please your help, the bright of the info center display on my Expedition is to low and I don´t know how can increase its intensity. If anyone have a tip or know how to solve this problem, we would greatly appreciate ...
 
Last edited:
OP
OP
F

fabioav

New Member
Joined
Apr 14, 2015
Posts
4
Reaction score
0
Location
ECUADOR
It is not the switch, because it regulates all light panel, except the Info Center Disply ...
 

Quasar

Full Access Members
Joined
May 18, 2014
Posts
123
Reaction score
9
Location
Milwaukee, WI
Pretty sure, it's the same issue as crown Vic's and other fords. There are cold solder joints in the cluster that have failed. You can fix it if you are good with a soldering iron. Problem is, I'm not sure if anyone has figured out yet which of the resistors need to be re soldered. I think the only other way to fix this issue is replacing the entire dash cluster.
 
Top