Just Bought a used Ford Expy Eddie Bauer 2006

[Entity]

Hi all,
I just bought a Ford Expy and Im having problems with the keys.
it will start the truck,the remote works fine in opening and shutting the doors but if i insert the key the door lock wont open or close.

secondly none of the charger ports have power in them.any helpful suggestions would be welcome.Thanks!

 

[sgtowing]

the door lock has been changed is my opinion for the key. as for the charger ports, check the fuses.

 

[Stoned06]

Sounds as if the ignition might have been re-keyed and they didn't do the door lock to match.
As far as the charger ports, you're best bet is to look at the fuse for them. The specific one to look at will be in your owners manual. If that doesn't work, maybe it is unplugged under the console.

 

[Entity]

Thank you to each one for the help.
can the keys be reprogrammed for the door ? like its reprogrammed/relearned for ignition ?
I tried scanning with an OBD II actron and there is no voltage/no reading.
looks like the 12v charger ports are connected to the Scanner port fuse.
have to check the fuse .Hope the dealer did not short it to hide issues from me.the truck runs smooth with no check engine lights though!
Any insights ?thanks again!

 

[sgtowing]

you dont reprogram keys for the door. the lock for the ignition is actually keyed differently than the doors. a local locksmith(not pop-a-lock) might be able to change the pins in eithe to make one key work for both.

 

[timberwoof]

Looks like everybody already answered your question so I'm just gonna say welcome to the forum. You are I think the only other '06 owner I've seen so far.

 

[matt]

I just bought one today too. First Ford for me.

 

[Stoned06]

Looks like everybody already answered your question so I'm just gonna say welcome to the forum. You are I think the only other '06 owner I've seen so far.

Mine's an '06 too.

 

[timberwoof]

Sweet. I don't feel alone after all. Ha

 

[rburch]

Welcome!

 

[mtondreo]

I am an 06 also, I will try to look at my fuses tomorrow and see if there is a specific one for the charger ports. I have not popped any of mine that I recall though so can't guide you on it, but will definitely look. Thanks and welcome, Mike.

 

[hlygrail]

FWIW, I had to visit a locksmith to get a new key made (a real locksmith, not a kiosk in box store), and he said that sometimes the door locks seize-up due to non-use (since we get spoiled with our clickers).

Mine didn't want to move too much, but he sprayed some WD-40 in the key hole, and it eventually started turning.

 

[Entity]

Thank you each one for the warm welcome.
Been through the fuse box and found F41 blown.
replaced it and the OBD scanner port works but all 4 charger ports 12v
have no voltage.Hope its something minor.

 

[walnuts4x4]

I was gonna say try spraying the door locks with PBblaster... I try to use my key every know and again so they don't freeze up...

 

[Dexter]

Sweet. I don't feel alone after all. Ha

06 Limited lol