Lifted Expeditions of EF.com (picture post)

[CameronB]

Yeah it's a tintable liner from Raptor. You just get a base coat of whatever color you want and add it to the mix. Super easy!

 

[sgtowing]

do black head lights...nice truck

I agree. Beautiful truck. What size wheels and tires? Do you have a lift?

 

[CameronB]

3/2 level kit. 20 inch wheels with 33 inch tires (305/55R-20). Thanks for the compliments in pretty pumped the way it turned out!

 

[Maverick1701]

Here is my wife's 99 Expy. It has 2" coil spacers and a torsion twist, 305/70R16 Runway Enduro M/T's, 16x8 Eagle Alloy's with 1.5" wheel spacers.

I have been wondering what I needed to run 305/70R16s (I have several tires left over from my 94 diesel). that is one sharp rig y'all!

 

[GAINMOB]

I have been wondering what I needed to run 305/70R16s (I have several tires left over from my 94 diesel). that is one sharp rig y'all!

ask her if she wants the rims powder coated pink

 

[AaronLG]

See sig

 

[timberwoof]

You guys make me jealous!

 

[Notmyidi]

Fabtech 6 inch lift (switched to coils) and 3 inch body lift. Eagle alloy wheels and 285/75/16 tires

I hate the tires that are on it, there cheap and look good but absolutely worthless, they cake and suck in snow

I bought it this way

sent from my mind via of telepathy

 

[4.6 CALIBER]

I joined the lifted club in July but was waiting to get wheels and tires and find time and a trail for a photo shoot. I went fishing this weekend and found a rock trail with a little mud and I was impressed. I got a pro-comp2/3 lift and MT 17"x9 classic 2 wheels with 35s.

 

[ZombieSoldier]

any rubbing? i so would love to have that combo if there is no rubbing

 

[4.6 CALIBER]

any rubbing? i so would love to have that combo if there is no rubbing

A little trimming is required. A little off the front lip of the bumper and a little off the running boards. If you want I can take a few pics up close when I get the time during the day. I used a heat gun to push in the inner fender on the passenger side only. The only time I get rub now is still on the lip but only in reverse when the wheels are turned a a certain angle but is minimal. I might not even bother trimming.

 

[ZombieSoldier]

pics please.

 

[ZombieSoldier]

also do you have any pictures of it on a level surface?

 

[4.6 CALIBER]

also do you have any pictures of it on a level surface?

I will take some detailed pics for you this weekend. Level pics and also where I trimmed and used the heat gun.

 

[ZombieSoldier]

*thumbs up* thanks buddy!

 

[tallsville]

guess since its lifted now i can add a pic to this section.

specs 3.5/2.5 spacer lift with 285/70/17 AT(33")

 

[4.6 CALIBER]

guess since its lifted now i can add a pic to this section.

specs 3.5/2.5 spacer lift with 285/70/17 AT(33")

They look so much better lifted. I like it in silver.

 

[4.6 CALIBER]

pics please.

Ok, I don't have any before pics of where I trimmed and my cell takes crap pics so you kind of have to compare with yours to get the idea. I also took pics of it on a flat surface.

 

[ZombieSoldier]

that looks pretty badass bro. does it rub during articulation, or rub the frame/suspension while turning at all? What offset are your wheels?

 

[4.6 CALIBER]

that looks pretty badass bro. does it rub during articulation, or rub the frame/suspension while turning at all? What offset are your wheels?

Thanks, only rubbing is when reversing and the wheels are at a certain angle. The wheels touch the front lip which I have not finished trimming. the offset is stock but with a 9” wheel which pushes the wheel out to give the perfect look imo.
Take a look at the fitment guide on Mickey Thompsons site. I followed their guide and found the specs and three different styles of wheels that work on our truck. You can search by vehicle also.