Monroe Spring Conversion 90010 on 1998 Nav Image

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MAXXOD

New Member
Joined
Jan 20, 2014
Posts
2
Reaction score
2
Location
Jersey Shore
image.jpg


Just finished the coil conversion on my 1998 Navigator using Monroe part number 900100 for Expeditions.....cranked the torsion bars to level out the font end, since it was sitting with her ass in the breeze.....wanted to add an image for others reference.
 
OP
OP
M

MAXXOD

New Member
Joined
Jan 20, 2014
Posts
2
Reaction score
2
Location
Jersey Shore
Just bought her last week with 130k on the clock, everything worked fine, but the compressor was loud and running a lot. The front drivers side air bag was ruptured.......installed the Monroe kit, hopefully I won't regret it since this is my vehicle for towing a 14 foot enclosed motorcycle trailer....
 

Lightnig

Full Access Members
Joined
Jan 23, 2013
Posts
709
Reaction score
91
Location
Behind you
First off, welcome to the Forum

Secondly, thanks for the pic and feedback.

Looks good, now you just need some bigger rubber to fill out those wheel wells some... :wink:
 
Top