O4 Expedition 2nd row middle seat removal

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

tesoroman

Member
Joined
Aug 19, 2020
Posts
11
Reaction score
2
Location
Alaska
The folding release cable is locked, any specifics on removing that seat or a powered driver seat that is all the way back and will not go back and forth bit, will power in all other directions.
 

Soldiersurfs

New Member
Joined
Apr 28, 2021
Posts
1
Reaction score
0
Location
Austin Tx
Make sure the track is clear and try moving it up and forward or down and forward at the same. I can't lower mine unless I go back and down
 

GAINMOB

Supporting Member
Supporting Member
Joined
May 19, 2010
Posts
14,561
Reaction score
888
Location
Hampton, VA
there are 4 big bolts holding the middle seat down with attached flanged hinge on them...i needed a torque wrench to break them loose then good from there...just remove all the plastic covers to get to the bolts in the floor...might want to remove one of the other seats to have sufficient room to get it out
 
Top