Just want to be clear because I believe I am going to put one of these on my 2015 Expy with 61,000 miles. So you basically left the line on the drivers side attached to valve cover, cut the line on the turbo side of sensor, attached the fuel line you purchased and ran it to the passenger side and Tee'd it into the line going from the pvc valve to the can.
Also, I may at first just use this can as a single side to begin with. Anyone know why I couldn't do this if I cap one of the two side ports on the can where the turbo lines would attach. The reason is I have an extended warranty and my dealer hasn't given me a clear answer on if this will void my extended warranty. My vehicle is currently there for two reasons. One is I am getting fuel, or junk in my oil. In 3000 miles the oil level is going up on dipstick. When I change oil it appears to be adding a half a court of gas or gassy junk to my oil. They so far have not found anything that is leaking down in my engine. If they don't find anything I'm hoping this catch can will capture what ever is going in my oil.
The second reason its at dealer is for a one time occurrence I had. Driving and wrench light came on and I lost all power, coasted to the shoulder of road and the vehicle ran so rough I though something internal broke. I shut off engine, restarted and everything back to normal. Of course they no codes recorded and they cannot find anything wrong that caused this. If it happens again I am going to hook up my scanner and hopefully catch a code before I turn the engine off so I can show them what it is. This is the reason I would only hook can up as a single to begin with because if I take it back for this problem I will remove can and don't want drill holes.