Whats in yo Garage?!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jacks3am

Full Access Members
Joined
Jul 28, 2010
Posts
1,192
Reaction score
10
Location
michigan
I have an old piano, detailing stuff, bikes, sometimes a car or the expy, lots of tools, sound radio, a TV, and an extremly slippery floor when its wet!

And my garage is the neighborhood hangout!
 

KWT2000

Full Access Members
Joined
Feb 4, 2010
Posts
2,378
Reaction score
43
Location
NINE MILE FALLS
i have an 83 K5 Blazer, a body to a i think its a 69 GTO, my motorcycle, the boat. some christmas stuff and lots of parts bins, a pellet stove, some doors.....
 

99 Expy

Full Access Members
Joined
Feb 19, 2010
Posts
1,016
Reaction score
2
Location
Laramie, WY
I don't have a garage, I have a barn, so it holds a lot of :poop: We have 2 08 camo grizzly 700s (one is my dad's, the other a friends), an 05 Polaris 500 Sportsman (mother), restored 1947 John Deere A (Grandfathers), 84 KX80 (siblings), a custom made enclosed trailer for hauling carcasses and gear for hunting, my 2000 Polaris Indy 500 in pieces, 873 Bobcat with Snowblower and other attachments, a few welders, motors and lots of other junk. Also have a 68 Fairlane GT in our machine shed with a bunch of materials from my dad's construction company.
 

walnuts4x4

Full Access Members
Joined
Jun 18, 2009
Posts
6,458
Reaction score
51
Location
Watertown, NY
i don't have one.... but my boat is in my landlords garage.. and my tools and detailing stuff are in my office...lol
 

JDMitchell

Full Access Members
Joined
Jan 26, 2011
Posts
620
Reaction score
11
Location
Fort Leonard Wood
I like to consider myself a combination of Clark Griswold and Tim the toolman Taylor.

I have a CX-9 (the family truckster)
my motorcycle
5 bikes
2 razor scooters
thumpin' stereo
lots of tools
the most comfortable recliner ever
Lawn mower
Weed eater
all my fishin' gear
lots of boxes of Christmas decorations
deep freeze
enough tactical gear to outift a small army

The Expy gets stuck in the driveway......................
 

panda24619

Full Access Members
Joined
May 18, 2010
Posts
5,485
Reaction score
43
Location
San Diego
right now we got the heep. have to get it running cause my moms car is still getting a new face lift. so we did the rear brakes, today did the belts, and now... UGH... the carb is dripping fuel. so got to rebuild it now. what ever. but other than that we have our water heater, washer, dryer, all chemicals from paints, fuel, oil, atf, windex, bleach, stuff like that. then we have a junky boombox, an old chair, paint for the house, 2nd fridge, tool bench, tool boxes, just the basics. so everything but an air compressor and air tools. need to get those.
 

ELVATO

Full Access Members
Joined
Nov 25, 2006
Posts
2,634
Reaction score
34
Location
Orlando, FL
Some detailing stuff, a work bench my dad built, my roof racks, punching bag, Bowflex, some cheap Walmart weights, a tile saw (on top of work bench), and a whole bunch of tile and thinset.
 

alaskanexpy

Full Access Members
Joined
Mar 19, 2011
Posts
1,645
Reaction score
134
Location
anchorage alaska
more tools then i can even list.

'76 vette
'56 chevy bel-air
'99 explorer limited
'02 excursion

and alllllll kinds of ford parts, auto body/paint stuff. all my detailing supplys


031.jpg

(my old excursion not my current one)
030-1.jpg
028-2.jpg
 

jjbusa

Full Access Members
Joined
Jan 27, 2010
Posts
515
Reaction score
16
Location
miami
more tools then i can even list.

'76 vette
'56 chevy bel-air
'99 explorer limited
'02 excursion

and alllllll kinds of ford parts, auto body/paint stuff. all my detailing supplys


031.jpg

(my old excursion not my current one)
030-1.jpg
028-2.jpg
now thats a Garage!!! :pepper:
 

Soldier777

Full Access Members
Joined
Jul 22, 2011
Posts
697
Reaction score
3
Location
90101
I pretty much kicked out my expy and have been filling it up with tons of tools... Cant ever have enough tools right lol
 

treycool94

Full Access Members
Joined
Dec 23, 2009
Posts
561
Reaction score
2
Location
vienna VA
right now we got the heep. have to get it running cause my moms car is still getting a new face lift. so we did the rear brakes, today did the belts, and now... UGH... the carb is dripping fuel. so got to rebuild it now. what ever. but other than that we have our water heater, washer, dryer, all chemicals from paints, fuel, oil, atf, windex, bleach, stuff like that. then we have a junky boombox, an old chair, paint for the house, 2nd fridge, tool bench, tool boxes, just the basics. so everything but an air compressor and air tools. need to get those.

panda dont you have a jeep cj? post a pic!

umm i got two garages on with all my dads workshop stuff is in one and my drum set in in the outher garage with a bunch of useless stuff
 

panda24619

Full Access Members
Joined
May 18, 2010
Posts
5,485
Reaction score
43
Location
San Diego
panda dont you have a jeep cj? post a pic!

umm i got two garages on with all my dads workshop stuff is in one and my drum set in in the outher garage with a bunch of useless stuff

0701001342.jpg

thats the one i have on photobucket. i would have to search for the other ones, but shes a beast. dad keeps messing with it right now. got home at midnight and he was working on her. the carb was leaking fuel so got a rebuild kit so my dad was going to do it and messed with something so he had to take it all apart and so he fixed that. the left turn signal isnt working out good, so he took that apart and the water pump is making noise so my dad went to take it out and broke a bolt. so whats that stuff you use to free up rusty bolts? pb blaster or something like that?
 

99 Expy

Full Access Members
Joined
Feb 19, 2010
Posts
1,016
Reaction score
2
Location
Laramie, WY
the water pump is making noise so my dad went to take it out and broke a bolt. so whats that stuff you use to free up rusty bolts? pb blaster or something like that?

Did the bolt break off flush or is it still sticking out some? I would try some PB Blaster on it and let it sit for awhile then get a vice grips on it and try that, otherwise try to tap it if its flush, but I've never been to good at that. . .
 

panda24619

Full Access Members
Joined
May 18, 2010
Posts
5,485
Reaction score
43
Location
San Diego
Did the bolt break off flush or is it still sticking out some? I would try some PB Blaster on it and let it sit for awhile then get a vice grips on it and try that, otherwise try to tap it if its flush, but I've never been to good at that. . .

i really dont know. when i got home my dad told me. ill ask him when he gets home. and it is PB blaster. ill tell him to get some. it was just one bolt so the water pump is still on there, but still not safe. its been jiggleing so my dad was going to replace it or just fix it. but now its still doing the same. got to get a new hose since my dad had to cut it off and add more rad fluid since its all gone. haha
 

MPTonyT

Full Access Members
Joined
Jan 20, 2011
Posts
109
Reaction score
2
Location
Tampa Bay, FL
Heres My Garage, It's my personal install bay. It has 220v, 110v, It has three drops (35ft retractable ceiling drop, 100ft to the left side by the overhead door, and a 25ft flexi hose next to the work bench) for air with a 60 Gallon Kobalt compressor out back in its own building. I have 2 industrial 3 blade fans to keep the Florida Heat under control and 5 florescent lights in there to light things up at night. Pay no attention to my wifes section of the Garage (the washer and dryer) haha. Enjoy. It also has a Mini fridge and Freezer in there as well.

2011-01-31202424.jpg

2011-01-31202438.jpg

2011-01-31202617.jpg
 
Top