Discussion in '3rd Gen - 2007 - 2017' started by 13crushrubi, Sep 30, 2013.
Not sure about to the wheel hub but my stock height with load leveling was 35 1/4" from the ground to the center of the fender arch. I'm now at 37 1/4.
38" F / 36.25" R
The load leveling models typically sit lower stock so I'm wondering if you have a 3" lift in the front and stock height in the rear.
3.5" front/2.5" rear eBay spacer kit. Tires are 33x12.5, unsure on rim width and backspace, adapters to 6x5.5 are 1.5"wide.
Hoping to get 6x135s and ditch the adapters, got the rims/tires for cheap, stocks were toast. Will add more pix when I change the setup.
Has anyone put a uniball upper control arm on with the leveling kit?
Hello and yes.
I used an Icon F150 2009-2014 set for my 2007 Expedition with Icon coilovers. Love them all.
Specs on the spec page www.1LifeLive.com
Shoot forgot to mention its for a 2015 expedition El. Looks like uppers for F150s are the same from 04-17. I need to see if the expedition uppers are the same from 07 to 15.
Well you just need to figure out which f150 years match your year Expedion. Icon makes the uniball Control arms also for the newer F150s and one of those will match your rig.
Separate names with a comma.