97 expedition air bag to coil spring

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
L

Lamar316

Member
Joined
Oct 1, 2018
Posts
7
Reaction score
1
Location
Palm bay fl
So what do the insulators mount to and i looked up your link and onnly seen upper insulators and no lower. I really do appreciate all yor advice
Lamar
 

justKen

Active Member
Joined
Aug 7, 2018
Posts
37
Reaction score
23
Location
Colorado Springs, Colorado
So what do the insulators mount to and i looked up your link and onnly seen upper insulators and no lower. I really do appreciate all yor advice
Lamar
There is typically only one (1) insulator per spring used. This is to lessen the amount of vibration and road noise transferred via the spring from the axle into the truck body.
Place an insulator over the spring seat/ place the spring on it's seat/ done.

/K
 

wpatters1229

Well-Known Member
Joined
Oct 24, 2016
Posts
48
Reaction score
6
Location
Pleasant Hill CA
Do not go cheap...get a well-made kit. The cheap ones use weak components. I did the conversion and it was great. What I should do is replace the torsion bar with a stronger one since there is a bit of a bouncy feeling the in the front.
 
OP
OP
L

Lamar316

Member
Joined
Oct 1, 2018
Posts
7
Reaction score
1
Location
Palm bay fl
I hot a westar seems to be well made and easybto follow instructions.Thanks for all the help.
Lamar
 
Top