lift

  1. djarrodingo

    How to stop upper control arm from hitting springs after a lift

    Hello everyone, I've seen on the forums that plenty of people lift their Expys and then experience issues with upper control arms hitting the springs creating noise and a more unpleasant ride. I installed a 3/2 lift on my 08 EL and had this happen immediately. I attempted to fix it by...
  2. bobgriner

    Liftgate / Hatch Elec Button Inoperable (non-power)

    I'm still in the fact-finding phase here. I have a 2008 XLT that has a button for the liftgate / hatch, but not a "power liftgate." The button for the liftgate / hatch glass works perfectly. FACTS : The entire rear hatch locking actuators (window and liftgate / hatch) have a healthy 20amp fuse...
  3. FX4_SHEA

    Word to the wise - 34.5"s Don't Fit!

    TL/DR: 2019 Expy FX4, RL 3/2, 34.6" tires rub in the rear. Help! STORY: I just got the ReadyLift 3/2 kit installed and had it realigned to the custom specs laid out in the RL instruction manual. I did as much research on this site as I could about what tire size would fit, and used Readylift's...
  4. J

    Larger Coil Springs?

    I'm looking to do a torsion twist and rear lift (around 2") to help clear larger tires. I know i can get 2" coil spring spacers for the rear, but does anybody know if there's an aftermarket larger coil spring that I can swap in instead? My expy is pushing 208k miles, and I figured I'd rather...
  5. D

    Expedition II lift kit

    Hi everyone. I have Exp. 2nd gen, and i wanted it higher, so i was loooking for spacers above absorbers. BUt many of them can´t be shipped in my country. So my question is, does anyone have technical drawing of spacers for exp. 2nd gen ? I was looking for 3" front and 2,5" rear. I will let them...
  6. E

    2WD WITH RAPTOR WHEELS AND TIRES

    I know there are plenty of "Raptor" posts and conversations going, but does anyone out there have a 2WD with the Raptor wheels and tires set up? Looking to make the upgrades and didn't know if I had to add a lift in order to make this work. If so, what lift or leveling kit did you go with...
  7. B

    what front axel is my expy

    i’m trying to buy a lift kit but it says for dana 44 only, my questions is what front axel is my expedition? it’s a 2002 4x4 expedition.
  8. B

    Cut the Bumper or Get a Lift--Advice Needed

    Hi, all. I have a project Expedition going and could use a little advice. I am the original owner of this 2000 Ford Expedition 4x4 XLT/Sport. I want to make it look a little more aggressive. I have tuned up the mechanical, will add rims/tires, and paint last. This is my first time doing a...
  9. B

    Cut the Bumper or Get a Lift--Advice Needed

    Hi, all. I have a project Expedition going and could use a little advice. I am the original owner of this 2000 Ford Expedition 4x4 XLT/Sport. I want to make it look a little more aggressive. I have tuned up the mechanical, will add rims/tires, and paint last. This is my first time doing a...
  10. JB02Exp

    Replaced Rear Glass Lift Supports. Which will crack first, the glass or me?

    I have an 02, it’s my 1 year with it and a week from my birthday so I’m replacing a few of the OE parts from when it was new. 18 years ago. I bought a replacement pair of lift support, gas shocks, lift struts, I worked at AutoZone and we called them lift supports. Anyway, I installed them and...
  11. Jordan90

    Ccd suspension

    Has anyone done a conversion yet deleting ccd off 18 expedition.
  12. P

    2007 Expedition lift kit

    Hi everybody, It is my fist post here, i am looking to put some 38" tires on my truck i already have them. I know that i will have to cut my fender. My question is, what eight of lift do i need? 4" 5"? Thank you
  13. N

    New full suspension option from ICON

    What are peoples thoughts on this? Expensive!, but Icon has a great reputation. http://iconvehicledynamics.com/shop/743-complete-suspension-systems https://www.4wheelparts.com/p/icon-suspension-75-2-25-stage-2-suspension-system-k93302t/_/R-FRDK-K93302T
  14. leadfarmer

    Speedometer calibration after lift/tires

    I recently installed the Readylift 3/2 lift along with the recommended 285/75r18 tires on factory wheels. Those tires are actually a little too big and were rubbing in the rear before doing some trimming of the liner. The fronts just barely clear, and rub slightly in the right circumstances. I...
  15. Neil T Casey

    2015 EL Platinum with 22s and CCD...Liftable?

    Ive been going through these threads for a while now and stumbled on some commentary tonight that confused me. It said Expys with the CCD are not liftable. Is this true? I have reached out to readylift to see if they can answer this as well. I can fit the 305/45r22 tires on the truck as is...
Top