1999 Expedition 4x4 not fully disengagin

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Vigilante

Well-Known Member
Joined
Sep 30, 2011
Posts
90
Reaction score
10
Location
San Francisco, CA
Ok...Interesting problem here and it leaves me a bit puzzled.

As a 99, with the shift on the fly and A4WD and no more manual or auto locking hubs etc etc, I've had a problem with the system disengaging.

At a turn of the switch, the system will engage. With another turn of the switch, it will disengage...almost. The 4x4 light goes out, but if you go to make a turn, you feel it for sure. A couple of times of turning the system on and back off tends to do it, but I'd rather fix this problem than come up with a work-around (although its good to know).

I'd appreciate some input on this. Thanks
 
OP
OP
Vigilante

Vigilante

Well-Known Member
Joined
Sep 30, 2011
Posts
90
Reaction score
10
Location
San Francisco, CA
Anybody have any thoughts?

Could it be that the physical front hubs need replacing?
 
Last edited:
Top