2003 Eddie Bauer I am pumping out 345HP, and 405 torque.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

G

Guest

I just installed a new Gibson stainless steel exhaust, K&N cold intake, and Hypertech programmer. I am pumping out 345HP, and 405 torque. It is amazing how just $1000 will change the vehicle.
 

monsta

Full Access Members
Joined
Nov 2, 2003
Posts
420
Reaction score
1
Location
Big Island of Hawaii
How did you measure that?

That is more than Hypertech claims by 74HP...

I take it you added all the "claimed" numbers from the manufacturers?? It doesn't work like that...
 
OP
OP
G

Guest

with all the upgrades those are true DYNO numbers

Just the Hypertech will not do it all, but with all changes, that is all that I needed to do.
 

monsta

Full Access Members
Joined
Nov 2, 2003
Posts
420
Reaction score
1
Location
Big Island of Hawaii
So, you're telling us that an intake, exhaust and programmer gave you a gain of 85HP and 55lb ft. of TQ?

No offense, but you don't expect us to believe that do you?

How did you measure the gains you claim?
 
OP
OP
G

Guest

How about tranny upagrades? With those numbers, you're gonna need some. And how about brakes? Great to have that much power, but also great to stop that much power also.

Let us know about how you got your dyno numbers, alot of us would love a 85 hp increase for $1000.
 

1999xlt

Active Member
Joined
Nov 3, 2003
Posts
33
Reaction score
3
Location
East Patchogue
Are you Ok??....................I think that you need to re-evaluate your statements.........

YOUR CLAIMS ARE IMPOSSIBLE with just those modifications...


Thats right I said IMPOSSIBLE..............

Steve
 

rwinch

Full Access Members
Joined
Jun 10, 2003
Posts
389
Reaction score
0
Location
Walkersville, MD
More questions should include:
1) What MPG is he getting,
&
2) What gas is needed...i.e 93 Octane????
 
OP
OP
G

Guest

Hey!! He is right!

I added all those things and my 4.6 is hot! Plus, I added some purple lights underneath and 200 pounds of bling-bling to the interior and I got another 300 horsepower and 500 torque lb/ft.!


Whoo-hooo!! ROTFLMAO!!!!
 

Keydo

Full Access Members
Joined
Dec 1, 2003
Posts
234
Reaction score
2
Location
SoCAL
I think you can get to 300 hp at the flywheel with chip programming and 91/93 octane fuel, though I haven't really seen it for myself.

Curious, but does anyone know what the drive train loss for the EXPY is and what rear wheel horsepower should be for the stock 5.4L engine?
 
OP
OP
G

Guest

reprogramming is my next thingto purchase and i've been toying with the idea of a 50-75 shot of nitrous i'v already upraded everything else(brakes, exhaust, intake) wheels and transmission
there is a dyno place down the street so as soon as I rake up the
cash for the reprogramming I will attempt to publish it to this site
 
Top