ABS light on

[bajaexpy]

ABS works fine, light is on. I went to check the rear sensor and broke the bolt in the proccess. Does the black box pull apart? I was afraid to break it too haha. I just see a boot with a red and green wire inside from the line up on the body connected to a black box and then the plug that goes into the differential. 97 expedition btw.

 

[panda24619]

the light is on? check your fluid. i had a blown line in the front that was leaking fluid causing the light to come on.

 

[bajaexpy]

the light is on? check your fluid. i had a blown line in the front that was leaking fluid causing the light to come on.

the fluid is fine

 

[99 Expy]

From your first post, when you say ABS is working fine, have you tried activating the ABS, or the brakes are working fine? Last winter, I unplugged one of the ABS connectors and the ABS light came on and the ABS did not activate (although I liked it better without ABS). It could be possible you have an open circuit somewhere or a plug that came unplugged.

 

[bajaexpy]

From your first post, when you say ABS is working fine, have you tried activating the ABS, or the brakes are working fine? Last winter, I unplugged one of the ABS connectors and the ABS light came on and the ABS did not activate (although I liked it better without ABS). It could be possible you have an open circuit somewhere or a plug that came unplugged.

I mean the ABS works when braking. Ok thanks. Theres a sensor at each wheel as well, right? I should note that the ABS light comes on as soon as the engine is started and it stays on.