Rob Adams
Well-Known Member
I recently bought this truck from an auction and have been driving it around w/out issue for several days now. Last night the Airbag light came on solid and when I plug my bluetooth OBDII reader with TORQUE into the truck it's stating it has a B2293 Body code which based on some googling looks like airbag sensor failure? Torque doesn't give me a 19 or 21 designation on the code and the light doesn't flash (solid on)
B2293 19 Restraint System – Air Bag Status (Driver Front Air Bag Circuit Failure)
B2293 21 Restraint System – Air Bag Status (Passenger Front Air Bag Circuit Failure)
Troubleshooting so far:
Disconnect battery (was replaced in november) and let set for an hour
disconnected and cleaned impact sensor under truck No visible wire breakage detected or corrosion on sensor
disconnected and cleaned all terminals under seats (driver and passenger) No visible wire breakage detected
Reconnected battery and started car. Light came back on solid
Short of pulling the airbag itself out of the steering wheel or passenger side any thoughts on anything else I could troubleshoot? I'm kinda worried about driving it as from what I understand the airbags aren't operational at this point.
B2293 19 Restraint System – Air Bag Status (Driver Front Air Bag Circuit Failure)
B2293 21 Restraint System – Air Bag Status (Passenger Front Air Bag Circuit Failure)
Troubleshooting so far:
Disconnect battery (was replaced in november) and let set for an hour
disconnected and cleaned impact sensor under truck No visible wire breakage detected or corrosion on sensor
disconnected and cleaned all terminals under seats (driver and passenger) No visible wire breakage detected
Reconnected battery and started car. Light came back on solid
Short of pulling the airbag itself out of the steering wheel or passenger side any thoughts on anything else I could troubleshoot? I'm kinda worried about driving it as from what I understand the airbags aren't operational at this point.