Anyone install a Readylift leveling kit?

[Nsw550]

Has anyone installed a Readylift that can give some feedback? I had one similar on my old 2003 expedition many years ago and loved it with larger tires (295).

https://www.readylift.com/3-f-2-r-lift-kit-ford-expedition-2018-up-1.html




Sent from my iPhone using Tapatalk

 

[Adam Huskins]

Yep. Worked great.




Sent from my iPhone using Tapatalk

 

[Nsw550]

Yep. Worked great.

Sent from my iPhone using Tapatalk

What tire size are you running?
How did it drop your MPGs?
Does it drive like pre lift factory?
Thanks looks badass. Do you have a profile view?




Sent from my iPhone using Tapatalk

 

[Adam Huskins]

Tires are Toyo Open Country AT’s 12.5”x35”R 20’s. MPG combined (mostly in town) is around 14. Highway usually goes up to 17 or 18. Rides great! Tires are very quiet considering. Pick your wheels carefully (offset is important). Mine are +18mm. Truck is awesome off road.




Sent from my iPhone using Tapatalk

 

[Nsw550]

Tires are Toyo Open Country AT’s 12.5”x35”R 20’s. MPG combined (mostly in town) is around 14. Highway usually goes up to 17 or 18. Rides great! Tires are very quiet considering. Pick your wheels carefully (offset is important). Mine are +18mm. Truck is awesome off


Sent from my iPhone using Tapatalk

Looks incredible. Any issues rubbing? Do you have the automatic running boards? I have the black standard stationary running boards and I’m worried tired will rub.




Sent from my iPhone using Tapatalk

 

[Adam Huskins]

Very light trimming of the inner fender liner. I have the retractable running boards. I did shorten them about 3 inches. Simple to do.


Sent from my iPhone using Tapatalk

 

[osteodoc08]

Supposedly this isn’t available for use with the load leveling rear suspension. What suspension does yours have?

 

[Adam Huskins]

Not the load leveling. I do know someone has done it. I think it required fabricating some brackets and then it was good to go.


Sent from my iPhone using Tapatalk

 

[Nsw550]

Supposedly this isn’t available for use with the load leveling rear suspension. What suspension does yours have?

I have the XLT


Sent from my iPhone using Tapatalk

 

[julijn]

Not the load leveling. I do know someone has done it. I think it required fabricating some brackets and then it was good to go.


Sent from my iPhone using Tapatalk

so did yours come with 22s? the kit says will not work for ccd suspension.. mine has the 22s with the ccd and I thought I was out of the lift game...

 

[Adam Huskins]

No. Mine came with 20’s and that’s what I put back on it just wider and with larger tires. there is a guy who did it with the ccd, “dspec0328” on Instagram. You could reach out to him.


Sent from my iPhone using Tapatalk

 

[Garrett]

So what did this guy do?

 

[Adam Huskins]

This was from him on Instagram.


Sent from my iPhone using Tapatalk

 

[VTExpedition]

I’ve done it on mine, 18’ Expedition Max Platinum. ReadLift 3F/2R, running 33.5” tires without trimming auto deploy running boards, no rubbing and no fender trimming needed.
Search VTExpedition for a post I did on this with pics.


Sent from my iPhone using Tapatalk

 

[Hectorsvt]

I have an fx4 and as well looking into this kit for I can put some beefier tires on

Yep. Worked great.




Sent from my iPhone using Tapatalk

Also were did you get those fenders at?? They look nice!

 

[julijn]

I’ve done it on mine, 18’ Expedition Max Platinum. ReadLift 3F/2R, running 33.5” tires without trimming auto deploy running boards, no rubbing and no fender trimming needed.
Search VTExpedition for a post I did on this with pics.


Sent from my iPhone using Tapatalk

I cant seem to find it.. looking to do this but I have the ccd suspention.. this gives me hope... can you show me where you got the adapters?

 

[VTExpedition]

I cant seem to find it.. looking to do this but I have the ccd suspention.. this gives me hope... can you show me where you got the adapters?

Purchased vehicle at Koons Ford in Baltimore and had them take it to “No Limit” to have the level kit installed. Didn’t make sense to do it myself for what Koons charged me. Call them and I’m sure they will tell you how to install the kit with the ccd suspension


Sent from my iPhone using Tapatalk

 

[James Alexander]

T

 

[James Alexander]

There are two people that make the brackets needed that I am aware of. You also need to find a shop that is willing to work with a little trial and error.

Attached is our 19 stealth with CCD

 

[James Alexander]

There are two people that make the brackets needed that I am aware of. You also need to find a shop that is willing to work with a little trial and error.

Attached is our 19 stealth with CCD

 

[Bonji]

That Stealth looks very nice. I am still confused about the CCD...it is part of the Stealth package with 22in wheels, but if you also add the Heavy Duty Tow package...doesn't that remove the CCD? It's not listed on my window sticker.