dadamaja
Well-Known Member
having this same issue right now, just started doing this yesterday, but the exception is that everything works except the power locks, tmps auto lights works ok, im going to try this
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I didnt check anything yet its so friggin hot here heat index at 115° with a 100% humidity , a little better weather next week, ill check everything then, ill let you know, and thx for your helpI dont know if the auto lights worked or not on mine. I never use them. I dont like them.
Just out of curiousity, is there power going to the #5 fuse in your fusebox?
Let us know if that wire was the culprit in yours as well.
Just found this thread after fighting this problem, sure enough whoever installed that metal cover plate pinched the loom uunder it and broke the red/white wire, and the solder joint literally fell apart. Thanks for the heads up, after this fix everything works as it should.