Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
Most emblems are affixed using 3M-type tape adhesive. Don't know about the blue ovals. I used a heat gun on the rear ecoboost emblem to remove it and substitute a chromed "3.5 twin turbo" emblem. The heat gun works well.
From @mossback post above here is a review of what I had to do to remove front emblem
here are some images of the front emblem removal. I was able to find the theee tabs behind the emblem and remove them without removing the plastic cover under the hood. Tight squeeze but I got it through the grill gaps with just my hands. Here’s a pic of the three tabs and the whole assembly offView attachment 23343View attachment 23342next you will need to remove the two nuts on the screw posts pictured hereView attachment 23344as he stated, twist the posts that you just removed the nuts off of and will look like this View attachment 23345 and emblem will fall right off! View attachment 23346
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.