I'm about to install a Magna-charger on my 2008 Expedition Limited
- Thread starter Hd Steve
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Hd Steve
Well-Known Member
Hd Steve
Well-Known Member
Hd Steve
Well-Known Member
Hd Steve
Well-Known Member
Hd Steve
Well-Known Member
It's been a little while now since my last update. So i thought i would upload some fresh pics and leave it at a cliff hanger... What kind of Fi am i going with???
Hd Steve
Well-Known Member
Hd Steve
Well-Known Member
Hd Steve
Well-Known Member
I may not have mentioned that i have a walbro 525 hellcat fuel pump in the tank. -8 line's ran threw a high flow filter and to a regulator. -6 lines were used for the return lines... No pics were took of this.
I also have a new bap coming in the mail. The hob switch will be set to activate@ 10psi. I will play with the voltage to the pump. I believe i can send 21 volts max. And yes the whole electric system has been upgraded to 8gauge wire and a added relay fuse.
I also have a new bap coming in the mail. The hob switch will be set to activate@ 10psi. I will play with the voltage to the pump. I believe i can send 21 volts max. And yes the whole electric system has been upgraded to 8gauge wire and a added relay fuse.
