SMichaelG2
Member
I have a 2004 Expedition XLT 2WD 4.6L.
I replaced the following parts as the truck has 193,000 miles:
- Lower control arm assemblies
- Upper control arm assemblies
- Outer tie rods
- Inner tie rods
- Struts with springs
- Stabilizer bar bushings
- Stabilizer bar links
The hubs do not seem to have any play. The clunking is the worst on washboard like road imperfections. It sounds like the noise happens as the suspension goes both up and down. Am I missing something, or could one of the parts I replaced be bad? They were all ordered through Rock Auto, and no parts appeared to be damaged when I installed them. Anyway, just wondered if anyone had this happen, as I thought replacing all of that would cure the problem.
I replaced the following parts as the truck has 193,000 miles:
- Lower control arm assemblies
- Upper control arm assemblies
- Outer tie rods
- Inner tie rods
- Struts with springs
- Stabilizer bar bushings
- Stabilizer bar links
The hubs do not seem to have any play. The clunking is the worst on washboard like road imperfections. It sounds like the noise happens as the suspension goes both up and down. Am I missing something, or could one of the parts I replaced be bad? They were all ordered through Rock Auto, and no parts appeared to be damaged when I installed them. Anyway, just wondered if anyone had this happen, as I thought replacing all of that would cure the problem.