Must have tools!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joined
Jul 18, 2021
Posts
15
Reaction score
13
Location
USA
Hey y’all it’s my first time posting! I have a huge bucket list of all the fun I can have making my Expy handsome, BUT! I don’t want to send him to the shop constantly with stuff I know I can do myself with some old school elbow grease and YouTube, but when it comes to tools, I don’t have much outside of the standard (hammer, flathead, philips, wrenches etc). Any recommendations on must have tools for doing interior/exterior work??? I have a 2019 XLT Max.
 

Going_Going_Gone

Full Access Members
Joined
Aug 31, 2018
Posts
574
Reaction score
328
Location
Phoenix
Other than hundreds of hand tools, quality tire pressure gauge, a good vacuum cleaner, floor jack, jack stands, battery powered impact wrench etc.; I have found that a good dual-action buffer like a Porter Cable with a flat, velcro mounting arbor and a variety of foam pads can be a big help when you want to polish and wax a vehicle. If you're not electronics savvy, I would not recommend a code scanner since the parts stores will pull up any codes for free in order to sell you something to fix the reason for a check engine light
 

ManUpOrShutUp

Full Access Members
Joined
Mar 27, 2016
Posts
2,113
Reaction score
1,157
Location
PA
A good variety of socket extensions will come in handy. Sometimes you need to hook a few together to get leverage on bolts in hard to reach places. A set of plastic trim tools is essential for interior work. That cheap plastic will scratch/break in the blink of an eye if you try to substitute a screwdriver.
 

scottdm

Full Access Members
Joined
Dec 2, 2018
Posts
828
Reaction score
495
Location
Western PA
If you want to change spark plugs periodically, make sure you get a long socket extension that locks where it connects to your sparkplug socket. Otherwise a normal extension will separate from your sparkplug socket when you try to remove the socket from a newly installed sparkplug due to the rubber boot inside the sparkplug socket. I use the one at the link below.

 
As an Amazon Associate we earn from qualifying purchases.

JasonH

Full Access Members
Joined
Nov 12, 2018
Posts
1,557
Reaction score
895
Location
Houston, TX
A torch. I just spent half my day futzing with the 27mm bolt on the bottom rear strut. One side came out easy, the other side was seized. I tried everything and finally just set that ***** on fire. Then it came out easily with a few goods wacks. Kicking myself for not getting the torch immediately.
 
Top