stamp11127
Full Access Members
Sent you the diagrams.
Check continuity from pin 10 - black wire / plug C220a to G200 ground (with the plug removed from cluster). Ground point is usually behind the kick panels. Do Not probe any pins on the connector other than the ground.
Sending another diag procedure. Totally unbelievable in the razzel dazzel bs to change the intensity of a light bulb compared to the old days.
Check continuity from pin 10 - black wire / plug C220a to G200 ground (with the plug removed from cluster). Ground point is usually behind the kick panels. Do Not probe any pins on the connector other than the ground.
Sending another diag procedure. Totally unbelievable in the razzel dazzel bs to change the intensity of a light bulb compared to the old days.
Last edited: