Rebuilding the E4OD

[DUNE RCR]

Not a how to but just some pictures of the guts inside my transmission. Figured I would share some pics while I have it apart. I'm uploading from my phone and for some reason it's only letting me do one pic at a time so bear with me here.

 

[DUNE RCR]

Valve bodies,accumulator, solenoid pack and separator plates removed.

 

[DUNE RCR]

Valve bodies/accumulator and solenoid pack

 

[DUNE RCR]

Instead of loading a million pics of piece by piece, here's everything lined up. I have the new clutches soaking in new fluid in a bucket and I will hopefully be putting everything together tomorrow.

 

[DUNE RCR]

I will try to get more detailed pictures when I do the reassembly.

 

[DUNE RCR]

Ok so intermediate clutch set, fwd planetary and the shell are installed. Forgot to get pics of the new stuff but here's what I got. You can see the fwd planetary and the shell.

 

[DUNE RCR]

I know this picture is blurry but f this snap ring in particular! It's on the output shaft inside the transmission if anyone is wondering and its in a very tight location.

 

[DUNE RCR]

Ok calling it a night. Got to another snap ring that is fighting me. Gonna call it quits now before I get pissed and smash something.

 

[DUNE RCR]

So forgot to take pics of the rest of the internals. It was another clutch pack then the pump assembly. All the valve bodies are back in and the transmission is completed. Now I'm connecting the transfercase and this should be married to the engine by later tonight or sometime tomorrow.

 

[DUNE RCR]

It's installed!!! Let me say that the transmission and transfercase together with the torque converter in it is stupid heavy!

Picture was taken right before I got the crossmember put in.