Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
What kind of spark plugs and coil packs are recommended and how much should I be looking price wise
Misfire in cylinder 4 might as well get them all done
The OEM plugs for the EcoBoosts from Ford are NOT good. They have actually gotten worse with the current generation.OEM Motorcraft.
Why are you replacing the coil packs? Do you have a misfire code for all of them? Or, replacing aftermarket ones?
www.tunedbyzfgracing.com
The OEM plugs for the EcoBoosts from Ford are NOT good. They have actually gotten worse with the current generation.
NGK 95605 plugs are definitely what most that know the Ecoboosts are recommending. Do a search on here. There are many threads about plugs.
![]()
Set of 6 NGK LTR7BHX (95605) Spark Plug | ZFG RACING LLC
NGK Ruthenium HX is designed for newer engines which demand high ignitability. Projected Square Platinum Electrode (PSPE) design promotes spark energy concentration and ignites a wider range of air-fuel ratios, offering improved performance in rich or lean engine conditions. 0.4mm Ruthenium...www.tunedbyzfgracing.com
OEM in this case is NOT the way to go.
Misfire in cylinder 4 might as well get them all done
This 100%. If you do go with OEM, check them out of the box, because the gaps will be all over the place. Actually you should check any plug before you install it. Gap is VERY important on modern motors.If you're feeling cheap, check your plug gaps. They open up over time and regapping might resolve your issue.. My boots disintegrated, so be prepared to replace those as well.
Anytime Jeff! Glad to help.Thanks Loki, your timing is perfect. With 159K on my truck and the most recent plug change used 2nd tier plugs due to backorders, I needed new plugs....and here you are!
Thanks again Brother, hope all is well!
jeff
Tasca is EXCELLENT to order from!Here is the Coil Pack through Tasca Parts - big Ford Dealer so you don't need to be concerned about counterfeit parts. They also sell other OEM brands. I just bought some coil packs for my C6-Z06 Corvette, local dealer wanted $149, bought from them for $85.
View attachment 76287
What’s the recommended gap for stock tuneThis 100%. If you do go with OEM, check them out of the box, because the gaps will be all over the place. Actually you should check any plug before you install it. Gap is VERY important on modern motors.
.031 is what is recommended from the factory. Many even stock run .029/.028. Especially if running 93, and running hard.What’s the recommended gap for stock tune
Hello. 24k on my 2018 Limited. Had a couple instances of “stumble“ and a little bit of a rough idle. Completely stock except for a catch can. I’m going to do a plug replacement with the Ruthenium as recommended. I was wondering why the one step colder plug NGK 95605 is recommended for a stock set up instead of the normal heat range NGK 90495. Some short trips, but 80% longer trips and 35% towing, some light and some 7000 pound towing. Very light use overall, but she was manufactured the third week of October 2018. Just days away from being a 19. Will the colder plugs keep my cam phasers, turbo wastegate, and shocks from going out? Seriously, I’ve just lost two front shocks, and replaced the battery with an interstate for some weird electrical glitches that are now solved, so she has been a good one. I feel pretty lucky so far…The OEM plugs for the EcoBoosts from Ford are NOT good. They have actually gotten worse with the current generation.
NGK 95605 plugs are definitely what most that know the Ecoboosts are recommending. Do a search on here. There are many threads about plugs.
![]()
Set of 6 NGK LTR7BHX (95605) Spark Plug | ZFG RACING LLC
NGK Ruthenium HX is designed for newer engines which demand high ignitability. Projected Square Platinum Electrode (PSPE) design promotes spark energy concentration and ignites a wider range of air-fuel ratios, offering improved performance in rich or lean engine conditions. 0.4mm Ruthenium...www.tunedbyzfgracing.com
OEM in this case is NOT the way to go.
I've had several 3.5's and the occasional stumble and rough idle seems to be normal. Your plugs should be good for 50-70k miles. I know drilling a weep hole in the intercooler really helps with the rough idle.Hello. 24k on my 2018 Limited. Had a couple instances of “stumble“ and a little bit of a rough idle. Completely stock except for a catch can. I’m going to do a plug replacement with the Ruthenium as recommended. I was wondering why the one step colder plug NGK 95605 is recommended for a stock set up instead of the normal heat range NGK 90495. Some short trips, but 80% longer trips and 35% towing, some light and some 7000 pound towing. Very light use overall, but she was manufactured the third week of October 2018. Just days away from being a 19. Will the colder plugs keep my cam phasers, turbo wastegate, and shocks from going out? Seriously, I’ve just lost two front shocks, and replaced the battery with an interstate for some weird electrical glitches that are now solved, so she has been a good one. I feel pretty lucky so far…
Yes, You will most like experience a smoother idle. I have done one colder in all my EcoBoosts, and even stock they idle smoother.Hello. 24k on my 2018 Limited. Had a couple instances of “stumble“ and a little bit of a rough idle. Completely stock except for a catch can. I’m going to do a plug replacement with the Ruthenium as recommended. I was wondering why the one step colder plug NGK 95605 is recommended for a stock set up instead of the normal heat range NGK 90495.
HAHAHA! Sure, you can run the stock plugs for 50-70K, but when you pulled them, did you look at them, and check the gap? I will bet you $100 they were all over the place. Even if you don't want to replace them, pull them and regap them. But if you are pulling them, why not replace them with better, that are gapped properly.I've had several 3.5's and the occasional stumble and rough idle seems to be normal. Your plugs should be good for 50-70k miles. I know drilling a weep hole in the intercooler really helps with the rough idle.
2015-2017 Expeditions have the 1st Gen 3.5TT EcoBoost with the 6Speed 6R80 Trans. It only has Direct Injection. The 2018+(4th Gens) received the Gen2 Motor and the 10 Speed. Expedition is ALWAYS behind the F150. Check to see if you have a weep hole before you drill one, but not a bad plan either.If I am going to pull the plugs, which I am, I will have new ones in hand and replace them. Also, I thought that the weep hole was rarely if ever needed on the GEN II ecoboost. It will probably be a month or two before I get to this, but I will post results.