Turn off check suspension message after air to coil conversion

[Scott mckenzie]

Hi I recently converted my 2005 Expedition from air to Monroe quick strut. How do you get rid off the check suspension message?

 

[1997SCEBFEX]

welcome aboard.

try a search; I know some have pulled the bulb from behind the dash.

sure others will chime in.

 

[Scott mckenzie]

Thanks for your reply. I tried searching and pulling the bulb won’t work because I don’t want to lose the other messages.

 

[1997SCEBFEX]

a bit off track, but on my 96LT4 Vette; it was clip a wire and pull bulb.
didn't shadetree mechanic or someone do this on one of their older shows? maybe they addressed it?

Ask bedrck47, he's the wiring guru.

 

[rjdelp7]

Fuse pull?

 

[creef14]

All the air suspension sensors and solenoids need to stay intact in order to avoid the message. If you dumped the sensors and/or solenoids, they're ridiculously expensive to replace.

Alternatively, when the check suspension message appears if you hit the "Reset" button 3 times quickly it should disappear until the next time you start the car. I've done this and driven a couple hundred miles without seeing the message again.