What Have You Done to Your 4th Gen This Week?

[GB19XLT]

Updated my Sync 3 software to 19205.

i should check my software as well, didn’t even think of doing that.

 

[Orthoguy]

Ordered and installed the 4DTech start stop unit. Took 5 seconds to insert and works perfectly. Eliminated the nuisance switch!

 

[Nautique220]

Had the tint done on the driver and passenger windows. Also put black gloss vinyl on the rear quarter panels. Love the way it looks.

 

[stricnine]

Added a dash cam with front and rear view.

 

[Oklahoma Jim]

Had the tint done on the driver and passenger windows. Also put black gloss vinyl on the rear quarter panels. Love the way it looks. View attachment 32850

I tinted the front passenger and driver windows too. It really makes it big difference.

 

[Artie]

I tinted the front passenger and driver windows too. It really makes it big difference.

Good tint is worth every penny. Once you have it on a vehicle you will do it from then on out.

 

[Nautique220]

Good tint is worth every penny. Once you have it on a vehicle you will do it from then on out.

Yes ! 3 weeks without tint was horrible.

 

[Rancidlunchmeat]

Added a dash cam with front and rear view.

Papago 760? How is the quality? How are you powering them? Got a picture of the back dash cam install?

 

[stricnine]

Yes, it’s the 760. Picture quality is good. I mounted the rear camera hanging down from the top plastic trim inside the rear hatch. Powered by USB.

 

[Rancidlunchmeat]

Yes, it’s the 760. Picture quality is good. I mounted the rear camera hanging down from the top plastic trim inside the rear hatch. Powered by USB.

Are you unplugging them each time you exit the vehicle or over night or do the USB plugs lose power when the engine is off?

 

[stricnine]

Are you unplugging them each time you exit the vehicle or over night or do the USB plugs lose power when the engine is off?

The usb turns on/off with the ignition. From start to finish the install took about 10 minutes, maybe. lol

 

[Rancidlunchmeat]

The usb turns on/off with the ignition. From start to finish the install took about 10 minutes, maybe. lol

I didn't know that! Makes it a much simpler install than hard wiring it with a low voltage kit, although I guess you lose the ability to use parking mode.

Thanks

 

[scottdm]

I find it amazing that Ford or other makers havn't offered recording capability for the 360 camera system. If the cameras could be aimed appropriately, it could take the place of dash cams.

 

[Artie]

I find it amazing that Ford or other makers havn't offered recording capability for the 360 camera system. If the cameras could be aimed appropriately, it could take the place of dash cams.

If I had a dollar for every time I’ve said this, dash cam and security cams while parked. This something that Tesla has done with its ‘sentry mode’ while the car is parked and it should be at least an option industry wide.

 

[stricnine]

Oh it can be, for a price! Hahaha

 

[Fozzy]

Put a hood stripe on to see if I like it. I want to put the stealth grill on and leave the chrome rings. Maybe, maybe not. Can’t decide.


Sent from my iPhone using Tapatalk

 

[Wayne Decker]

All my stuff has been small. WeatherTech mats, Canvasback for the 2nd and 3rd (including custom 3rd row seat slaps, since that row is always down) and today I added WeatherTech mud flaps.

 

[scottdm]

Had a small door ding in the driver's door removed with paintless dent repair. The guy has 20 years experience and had it taken care of in about 20 minutes. He was able to remove an existing grommet near the driver's door latch mechanism and did his magic. This is a real art form and he made it look easy! Only charged me $60, so I was a happy camper. Makes me wonder if the aluminum is more susceptible to dings than a steel door would be. I guess time will tell...

 

[StealthyBulldog]

All my stuff has been small. WeatherTech mats, Canvasback for the 2nd and 3rd (including custom 3rd row seat slaps, since that row is always down) and today I added WeatherTech mud flaps.

Any pics of the custom aspect? My 3rd row is also always down, so wondering what you did, thanks!

 

[Wayne Decker]

Any pics of the custom aspect? My 3rd row is also always down, so wondering what you did, thanks!

It's the same as the seat flaps they make for the second row. In the phot you see the 2nd row and the 3rd tucked behind it.