Let's See Those Lifted / Big Tire Gen 4s!!

[FBH7]

Highest setting in front and rear. Yes it is! Had a place there for 25+ years now.

It’s our favorite place on earth! Can’t wait to get back down this summer

 

[Lightning8U]

3/2 RL with Fuel Rebel 20x9s +20 wrapped with 285/65R20 Ridge Grapplers. No rubbing, no trimming the power boards. Love the ride and the look!!

View attachment 72589View attachment 72590View attachment 72591

Looks fantastic. Did you black vinyl the c-pillar as well?

 

[Zimdaddy21]

Hey yall! Been lurking here for a while and had a stock 21 Limited mall crawler that didn't offer much post worthy content lol. Glad to see other expedtioners as there aren't many around me in Central MO. I went take off raptor route since price was right and I felt 315 70 17 would be the perfect size until support mods come out. Ive flexed it and been all over without anything minor rub on front rear section of fender. Clearances are tight but work and very little poke which I wanted driving lot of gravel. Say goodbye to pathetic wranglers and their blue white walls. I wonder what Ford was thinking sending these out looking like this?

 

[Zimdaddy21]

First mounting them up I was concerned about clearance on pinch weld under the liner when off road but no issues.

 

[KDM39]

Here are a few pics of 285/55r20 Toyo AT IIIs on 20" Motiv Magnus Rims (+18mm offset).

 

[sjwhiteley]

Hey yall! Been lurking here for a while and had a stock 21 Limited mall crawler that didn't offer much post worthy content lol. Glad to see other expedtioners as there aren't many around me in Central MO. I went take off raptor route since price was right and I felt 315 70 17 would be the perfect size until support mods come out. Ive flexed it and been all over without anything minor rub on front rear section of fender. Clearances are tight but work and very little poke which I wanted driving lot of gravel. Say goodbye to pathetic wranglers and their blue white walls. I wonder what Ford was thinking sending these out looking like this?

View attachment 74325View attachment 74328View attachment 74326View attachment 74329View attachment 74330

What year are those raptor wheels? They look a bit different than the ones I’ve seen.

 

[crod1964]

3/2 Readylift 295/70/18 Nitto Recon Grappler

do you have a full side profile pic of rear tire fitment to wheel well opening and did you have use wheel spacers?

 

[crod1964]

View attachment 72211View attachment 72212

what size tires are you running


Bought it at the end of November and give it it's first bath today Used Turtle Wax Wash and Wax and washed it by hand. Easier than the dually I had before!

 

[Pawpaw]

LT275x70x18 BFG KO2's..33"x11" 10 ply. No rubbing at stock height and ride and handle great at 42 psi cold. Hardly any road noise either.

 

[Zimdaddy21]

@sjwhiteley 2020 raptor. only ones acceptable in my book lol

 

[Expedition Dave]

Anyone here have info on that 3 inch lift from Rough Country? How much suspension travel is left on the bottom end with that?

 

[Hokieskins]

Enjoying the thread

 

[Expedition Dave]

Going to do some more research into the Rough Country. Bilsteins may be up for sale, soon ;-)

 

[Expedition Dave]

Well the rear end is not a "proper" shock coil over lift and they won't sell the control arms seperately.
Does anyone know the quality of these components? Has anyone taken the plunge yet?

 

[Coop7379]

I just installed the Rough Country lift on mine last night. I am not a fan of leveling nor did I want to keep the stock shocks in my struts so i put the expy Bilstein's on the rear on the middle clip. it looks amazing and road like a dream last night when I test drove it. I will take and post pictures soon. next is figuring out the exact tire size I want and can manage. I plan on keeping the stock FX4 wheels because I like the way they look.

 

[GixxerJasen]

275/70R18 2022 F150 Tremor take-offs from Marketplace... wheels and tires... on "Stone Gray?" 2019 XLT Max 4x4

Ok, I gotta find an inexpensive set of these for my Magnetic Gray Limited Stealth.

 

[Coop7379]

Stock tires currently. RC 3/2 lift plus billsteins on the middle notch in the rear to keep factory rake

 

[sjwhiteley]

Stock tires currently. RC 3/2 lift plus billsteins on the middle notch in the rear to keep factory rake

Crikey! Need to get some wheels on that asap!

 

[Expedition Dave]

Coop, looking good! Feel free to poke around my thread(s) for more answers on decent yet lightweight tires, how to make sure they don't rub, and spacers. And not to be a wallflower, but Bilstein does say not to use there shocks in combination with spacers.

I don't know why, but they do, so be careful during full articluation if you go off-road.

 

[Lou Hamilton]

Stock tires currently. RC 3/2 lift plus billsteins on the middle notch in the rear to keep factory rake

Can you post better pics of the rear wheel? It looks like the lower arm did not recenter the wheel.