Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I just looked. Use the bigger one. That one goes to the intake and will get the throttle body as well as the plenum and the the valves. It made a fog bank but that was about it. Mines was running good so for me it was more preventative. I also dumped some of the bottle into the tank to get the injectors.
Sent from my DROID BIONIC using Tapatalk 2
im too nervous to do this myself...
That's where I'm going to pour it in, and I do mean pour since the suction from that line goes into the booster (Hopefully my funnel fits inside the hose). I haven't traced the hose that goes out the bottom of the nipple, but I lost track of the smaller hose that leaves the top and it doesn't seem to go into the intake/throttle body.I just ran it down the yellow nipple an a little in to the other end going to the intake. I let it run for about 10 minutes an shut it off. Came back later an ran the hell out of it. It did smoke for about 15 minutes an cleared up.