30 min idle FORScan

[alecw]

Was wondering if anyone has been able to disable the 30 min idle in FORScan. It is on an SSV Expedition so not really practical to always remember to turn it off every time.

 

[rugedraw]

According to the 2024 Expo spreadsheet, the 30 minute idle is set here in the PCM:

 

[Jim622]

An AI search produced this: APIM 7do-09-01
I looked at mine, the as-built data is 6313-AA29-fe
The same AI said to change the 6 to an E
I will test this later today and let everyone know if it works.
Edir: I did test this on my 2026 Platinum, and it did not work. I had to change it back.

 

[Mr Big]

An AI search produced this: APIM 7do-09-01
I looked at mine, the as-built data is 6313-AA29-fe
The same AI said to change the 6 to an E
I will test this later today and let everyone know if it works.
Edir: I did test this on my 2026 Platinum, and it did not work. I had to change it back.

Currently pretty much nothing works. But you never know until you try it. Just make sure to backup before proceeding.

 

[Jim622]

Funny thing is, I am able to read and back up. However, no changes have made any difference. I think Ford wants us locked out.